Catalog

Availability
R1200GS 2013-2016

R1200GS 2013-2016 

  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock
  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock
  • License plate light (3 LED).

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock
  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in aluminum. Model to be installed as a bar end caps, fits all handlebars with an 18mm internal diameter or with an 8mm internal thread. All the universal turn signals models we propose are visible on the last photo!

    24,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock
  • Short Clutch lever specific to many BMW 1200 models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify you choice (within the 8 available colors) in the comment before you finalize the...

    27,00 € In Stock
    In Stock
  • Long clutch lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.

    27,00 € In Stock
    In Stock
  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...

    37,00 € In Stock
    In Stock
  • Short brake lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.

    27,00 € In Stock
    In Stock
  • Long brake lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section before you finalize...

    27,00 € In Stock
    In Stock
  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many BMW models, built or assembled after 2012. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock
  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock
  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description) Sold by pairs. Resistors included for free with the...

    29,00 € In Stock
    In Stock
  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.

    19,00 € Out of stock
    Add to cart
    Out of stock
  • 2 function universal LED turn signals with position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    In Stock
  • AVDB by Jealou'S" Water radiator + Oil cooler guard, specific for the OEM radiators of the following BMW models :     R1200GS 2013-2016  R1200GS 2014-2016 Adventure  R1200GS 2017-2018   Sold in pairs only.

    79,00 € In Stock
    In Stock
  • HP CORSE, 4-TRACK, specific for the following BMW :   R1200GS 2013 - 2016 R1200GS 2014-2016 Adventure R 1200GS 2017 - 2018       The displayed price includes registered delivery with signature upon receipt.   24 months guarantee by HP CORSE.

    699,00 € In Stock
    In Stock
  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € In Stock
    In Stock
  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock
  • Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.

    4,00 € In Stock
    In Stock
  • Full pack containing : - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

    35,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock
  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € In Stock
    In Stock
  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In Stock
    In Stock
  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock
  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock
  • M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    5,00 € In Stock
    In Stock
  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock
  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € In Stock
    In Stock
  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock
  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length : 120 mm Depth : Hollow (empty) Diameter: 32 mm   Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock
  • Rim edge stickers set for motorcycle rims. Kit of 4 stickers.  

    8,00 € In Stock
    In Stock
  • Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following BMW :     R1200 GS 2013 - 2016   Note : pictures accurately display the kit, as you will receive it. Only the shaft rod can, in some case, slightly change depending on the motorcycle model.

    59,00 € In Stock
    In Stock
  • M8 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 6 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock
  • M10 Screw covers in anodized aluminium, available in different colours. For flat screw heads, fastened with an Allen key.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock
  • Protective cover / protection lens for the following BMW headlights :     R1250GS 2019 - 2020 R1250GS Adventure 2020 R1200GS 2013 - 2018 RS1200GS Adventure 2014 - 2019 R1200GS Rallye / Exclusive 2017 - 2019     

    34,00 € In Stock
    In Stock
  • Protective cover / protection lens for the following BMW headlights :         R1200GS 2013 - 2018 R 1200GS Adventure 2014 - 2018 R1200 GS Rallye / Exclusive 2017 - 2019 R1250GS 2018 - 2020     

    49,00 € Product available with different options
    Product available with different options
  • OEM gas cap adhesive protection specific BMW (no key model).   Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.

    14,00 € In Stock
    In Stock
  • Pair of front solid brake discs, model in 305 mm external diameter, specific and adaptable to many BMW. Classic round shape. List of compatibilities per motorcycle models are available below.   MEASUREMENTS: External diameter: 305 mm Internal diameter: 181 mm Thickness: 5 mm Mounting holes: 5 Mounting holes' diameter: 13,8 mm Distance between opposite...

    170,00 € In Stock
    In Stock
  • Adhesive tank pad protection, design GS.

    19,00 € In Stock
    In Stock
  • Adhesive tank pad protection, design R1200 GS.

    19,00 € In Stock
    In Stock
  • Wheel rim tape with R1200 logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.   Width : about 1 cm.

    14,00 € In Stock
    In Stock
  • Wheel rim tape with GS logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.   Width : about 1 cm.

    14,00 € In Stock
    In Stock
  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow (empty) Diameter: 34,5 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock
  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € Out of stock
    Out of stock
  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock
  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock
  • Universal aluminium license plate holder, adjustable and foldable.

    29,00 € Out of stock
    Add to cart
    Out of stock
  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € Product available with different options
    Product available with different options
  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock
  • USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    14,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € In Stock
    In Stock
  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock
  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock
  • Mounting bracket and adaptor for rearview mirrors, universal model for all handlebars with a 22mm external diameter. Available with 8 mm or 10 mm screw thread (M8 or M10), in normal / classic thread (not inverted). Sold per unit.

    5,00 € In Stock
    In Stock
  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. Sold by pair only.

    6,00 € Out of stock
    Add to cart
    Out of stock
  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock
  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock
  • Universal phone holder with handlebar mounting bracket. Min and max width of the phone holder : Min: 57mm Max: 87mm

    14,00 € Out of stock
    Add to cart
    Out of stock
  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock
  • Pair of riser adjustments for tapered handlebars with a 28mm external diameter at the center. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mmMounting bolt diameter : 10 mm

    34,00 € Product available with different options
    Product available with different options
  • Pair of universal handguards, various colours available. Aluminum base with an ultra-hard plastic coating for an optimal shock-resistance.  Fit on all handlebars with an external diameter of 22 mm or 28 mm and an internal diameter of 14 mm, 18 mm or threaded for M8 screws (8 mm diameter thread) Sold by PAIR only, hardware included

    49,00 € Product available with different options
    Product available with different options
  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth: 117 mm Diameter: 31 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock
  • Stainless steel radiator guard, specific for the following BMW :  R1200GS Standard,  R1200-GS Rallye, R 1200-GS Exclusive, R-1200GS Adventure from 2013 2014 2015 2016

    49,00 € In Stock
    In Stock
  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock
  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    In Stock
  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock
  • Windscreen universal spoiler for motorcycles and scooters, with CNC aluminum fastenings for a direct installation on your existing windshield. Available in 2 Designs (each one available in smoke and transparent color). Spoiler screen's measures : 27cm x 13cm (10,63" x 5,12")

    39,00 € In Stock
    In Stock
  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    In Stock
  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    In Stock
  • Steering damper + fastening bracket set, specific for BMW: R-1200 GS  2013 - 2016 R 1200-GS ADVENTURE 2014 - 2016 R1200-GS 2017 - 2018 Sold as displayed on pictures, with the mounting bracket always in black. Possibility to choose the hydraulic cylinder, in black or silver color.      

    149,00 € Product available with different options
    Product available with different options
  • Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available : S (123 x 60mm interior) M (140 x 80mm interior) L (165 x 87mm interior)  2 types of fastenings (handlebar or screw). Sold in kit: phone cover and fixing system.

    17,00 € In Stock
    In Stock
  • A M10 decorative screw that will give you energy even on a Monday morning ! Right side thread (standard). Sold by pair.

    4,00 € In Stock
    In Stock
  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € Out of stock
    Out of stock
  • Decorative anodised screw with colored offset.

    2,50 € In Stock
    In Stock
  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock
  • Speedometer protection TPU film specific for : R 1200GS 2004 - 2012 R1200-GS / Exclusive / Rallye 2013 - 2018 R-1200 GS Adventure 2006 - 2018

    12,00 € In Stock
    In Stock
  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € In Stock
    In Stock
  • Complete kit of spoke skin, perfect to completely decorate your 2 wheels, front and rear.   Each kit contains 38 short spoke covers (7.5" long) and 38 long ones (8.5" long)   Available in several colors.

    14,00 € In Stock
    In Stock
  • Polycarbonate Windscreen specific for BMW :    R 1200GS / Adventure (water cooling ) 2013 - 2018 R1250GS 2018 - 2020 R 1250 GS ADVENTURE 2019 - 2020

    69,00 € In Stock
    In Stock
  • Aftermarket cover for original speedometer, brand new and specific for the following BMW models :    R 1200GS 2004 - 2012 R1200-GS / Exclusive / Rallye 2013 - 2018 R-1200 GS Adventure 2006 - 2018    Sold as displayed on pictures.

    109,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of adhesive lateral grips for the sides of the tank (right pad and left grip). Specific for BMW :    R1200 GS 2013 - 2018 R1250 GS 2018 - 2020

    24,00 € In Stock
    In Stock
  • Aftermarket front fairing bracket, built in aluminum and based on the OEM model, specific for the following BMW :   R1200 GS  2012 - 2016 R 1200GS 2017 - 2018 R1200GS Adventure 2014 - 2019 R1250GS & Adventure 2018 - 2020

    99,00 € In Stock
    In Stock
  • Universal protection in teflon. Simple and quick to install.       Diameter foldable : 22mm / 25mm / 28mm Complete measurements on photo n° 2.     Sold by pair.

    9,00 € In Stock
    In Stock
  • Aftermarket regulator rectifier, specific for YAMAHA / HONDA / KAWASAKI / SUZUKI (complete compatibility list available below).   Brand new product, sold as displayed on pictures, ready to plug in (plug-and-play system). Hardware not included.   IMPORTANT : In order to avoid any mistake upon order, make sure to compare the pictures and/or measures on the...

    79,00 € In Stock
    In Stock
  • Aftermarket regulator rectifier, specific for BMW / TRIUMPH / DUCATI (complete compatibility list available below).    Brand new product, sold as displayed on pictures, ready to plug in (plug-and-play system). Hardware not included.    IMPORTANT : In order to avoid any mistake upon order, make sure to compare the pictures and/or measures on the...

    79,00 € In Stock
    In Stock
  • Waste tube, cables or pipes bracket in anodised aluminum, universal model adaptable to many motorcycle and scooter models. Sold per unit, various colours available.

    9,00 € In Stock
    In Stock
  • LED auxiliary light, universal modell with fastening for handlebars with a 22 or 28mm external diameter. Excellent lighting quality, white colour.   Sold by pairs, these lighting spots are ultra resistant, almost unbreakable !

    99,00 € In Stock
    In Stock
  • Decorative sticker with R1200 logo.

    4,00 € In Stock
    In Stock
  • Decorative sticker with GS logo.

    4,00 € In Stock
    In Stock
  • Holder for phone, GPS / navigation system or radar alarm. Sold as a kit : holding bracket for the phone, with its USB charger + fixing system. Several types of fixing available: - Handlebar mounting bracket (diameter 15 mm)- Screw mounting pad (for screw diameter 8 or 10 mm) All necessary technical information can be found below in the description.

    24,00 € In Stock
    In Stock
  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock
Showing 1 - 112 of 112 items