No products
Catalog
CBR 1000 RR 2006-2007
-
Steering stem nut HONDA - UNIK by Avdb
Steering stem nut for many HONDA models. You will find the motorcycles compatibility list below. Technical informations : Nut : M33x1 Necessary tools for installation : 41 wrench key Depth of the threaded part : 10 mm Maximum depth of the nut : 13.5 mm Tightening Torque : 850 Nm
19,00 € In StockIn Stock -
Front Brake fluid reservoir cap HONDA - UNIK by Avdb
M51x4 Front Brake fluid reservoir cap for many HONDA models. You will find the motorcycles compatibility list below.
15,00 € In StockIn Stock -
Oil filler cap HONDA - UNIK by Avdb
M20x2.5 oil filler cap for many HONDA models. You will find the motorcycles compatibility list below.
15,00 € In StockIn Stock -
Front Brake fluid reservoir cap HONDA - UNIK by Avdb
Front Brake fluid reservoir cap for many HONDA models. You will find the motorcycles compatibility list below.
24,00 € In StockIn Stock -
Clutch Fluid Reservoir Cap HONDA - UNIK by Avdb
M37x4 Cap for the clutch liquid reservoir, adaptable for many HONDA models. You will find the motorcycles compatibility list below.
14,00 € In StockIn Stock -
Rearview Mirrors Block Off Plates HONDA - UNIK by Avdb
Rear-view mirrors block-off plates for many HONDA models. You will find the motorcycles compatibility list below. Distance between the fastening points : 40mm Sold by pair.
24,00 € In StockIn Stock -
Rear Footpegs HONDA - UNIK by AVDB
Rear foot-pegs for many HONDA models. You will find the motorcycles compatibility list below. The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing. Good to know : The hardware (axles, springs, pins...) must be retrieved...
39,00 € In StockIn Stock -
Front Footpegs HONDA - UNIK by Avdb
Front foot-pegs for many HONDA models. You will find the motorcycles compatibility list below. The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing. Good to know : The hardware (axles, springs, pins...) must be retrieved...
39,00 € In StockIn Stock -
Turn Signal Spacers Adapters Honda Triumph Kawasaki
Turn signals spacers adapters in plastic, specific for many HONDA, some TRIUMPH, KAWASAKI. These adapters can also adapt on other models. 1 set of 4 spacers adapters is necessary for 1 pair of turn signals (2 adapters per turn indicator)
2,00 € In StockIn Stock -
Short Brake Lever HONDA CBR 600RR 07/17 1000RR 04/20 CB1000R
Short brake lever specific to many HONDA CBR 600 and 1000 RR, from 2004 to 2018. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the...
27,00 € In StockIn Stock -
Long Brake Lever HONDA CBR 600RR 07/17 1000RR 04/20 CB1000R
Long brake lever specific to many HONDA sportsbikes' models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section...
27,00 € In StockIn Stock -
Adjustable / Foldable Brake Lever HONDA CBR 600RR 07/17 1000RR 04/20 CB1000R
Adjustable / Foldable (also called Flip-Up) brake lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...
37,00 € In StockIn Stock -
Short Clutch Lever for HONDA VFR CB1000R VTR SP1 SP2 1100XX...
Short clutch lever specific to many HONDA models, such as VFR, CB1000R, VTR SP1, SP2, 1100XX... The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the...
27,00 € In StockIn Stock -
Long Clutch Lever for HONDA VFR CB1000R VTR SP1 SP2 1100XX...
Long clutch lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.
27,00 € In StockIn Stock -
Adjustable / Foldable Clutch Lever for HONDA VFR CB1000R VTR SP1 SP2 1100XX...
Adjustable / Foldable (also called Flip-Up) clutch lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...
37,00 € In StockIn Stock -
Lever Adjustable End Tip in Anodised Aluminum
Adjustable and foldable (flip up) lever adjusting part / lever end part.
7,00 € In StockIn Stock -
Set of 4 Levers' Gap Adjusters in Anodised Aluminum
Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.
8,00 € In StockIn Stock -
Pair of Universal LED Turn Signals x8 LEDs
Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!
19,00 € In StockIn Stock -
Pair of Universal LED Turn Signals with Orange Rear Light
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!
19,00 € In StockIn Stock -
Pair of Universal LED Turn Signals
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light. All the universal turn signals models we propose are visible on the last photo!
19,00 € In StockIn Stock -
-
Anodised Aluminum Brake Fluid Reservoir
Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.
27,00 € In StockIn Stock -
Pair of Reclining & raising AVDB Clip-On Handlebars 50 mm
Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
139,00 € In StockIn Stock -
Pair of Universal LED Turn Signals - Hole Design
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod. All the universal turn signals models we propose are visible on the last photo!
19,00 € In StockIn Stock -
Pair of Anodised Aluminum Angled Valve Stems 11.3 mm
Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.
9,00 € In StockIn Stock -
License plate light (4 LED) without threaded screws
Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm Distance between the two fastening points : 45mm
9,00 € In StockIn Stock -
Pair of small clear or smoked universal turn signals - 1 LED
Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!
19,00 € In StockIn Stock -
Complete Fairing set for HONDA CBR 1000RR 2006 / 2007
Full fairing kit, unused, Injected ABS quality, specific for the following models : HONDA CBR 1000 RR from 2006 and 2007.
590,00 € In StockIn Stock -
Pair of Resistors for LED Turn Signals
Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker). Power : 10W 10 ohm
3,00 € In StockIn Stock -
Pair of Universal LED Turn Signals - Design 2
Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!
19,00 € In StockIn Stock -
Motorcycle Tubular Tax Disc Holder, Various Colors Available
Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm
12,00 € In StockIn Stock -
Universal Tank Pad Protection - Carbon Look AVDB MOTO Model
Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !
9,00 € In StockIn Stock -
Universal Racing Wheel Rim Tape – AVDB Moto Model
Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White
7,00 € Product available with different optionsProduct available with different options -
Double-side Universal LED Turn Signals - Design 2
Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.
19,00 € Out of stockOut of stock -
Universal LED Turn Signals - Sequential or Standard Lighting
Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description)
29,00 € In StockIn Stock -
Tri-Functions LED Turn Signals
3-function universal LED turn signals with stop light, position light and sequential turn signals. Sold by pairs.
34,00 € In StockIn Stock -
AVDB Rearsets HONDA CBR 1000RR 2004 - 2007
Pair of AVDB rearsets specific for the following HONDA models : CBR 1000 RR 2004 - 2005 CBR 1000-RR 2006 - 2007 Sold by pair only (right and left rearset).
149,00 € In StockIn Stock -
Pair of Universal LED Turn Signals - 3LED
Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.
19,00 € In StockIn Stock -
Pair of Standard AVDB Clip-On Handlebars 50 mm
Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
79,00 € In StockIn Stock -
Pair of Reclining AVDB Clip-On Handlebars 50 mm
Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
109,00 € In StockIn Stock -
Bi-Functions LED Turn Signals
2 function universal LED turn signals with position light and sequential turn signals. Sold by pairs.
34,00 € In StockIn Stock -
Rear Wheel rim HONDA CBR 1000 RR 2004 - 2007
Rear wheel rim sold per unit, in 6061 T6 aluminum, specific for the following HONDA models : CBR 1000RR 2004 - 2005 CBR 1000-RR 2006 - 2007 Price also includes delivery through registered and delivered upon signature parcel. The text below should answer most of your question, if you still have doubts do not hesitate to contact us!
349,00 € In StockIn Stock -
Slip-On Exhaust HONDA CBR 1000RR 2004 - 2007 YOSHIMURA RS5 STAINLESS STEEL / CARBON
YOSHIMURA USA RS5 Stainless Steel / Carbon slip on exhaust, specific for HONDA : CBR 1000 RR from 2004 to 2007 Displayed price includes signed for upon receipt delivery (tracked parcel).
540,00 € Out of stockOut of stock -
Windscreen screw
Windscreen fastening screws in anodised aluminum. Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum. Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm
1,25 € Product available with different optionsProduct available with different options -
HIGH END CARBON COVERING VINYL FILM AVAILABLE IN VARIOUS COLORS
High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !
29,00 € In StockIn Stock -
Pair of LED Position Lights (5 LEDs)
Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.
4,00 € In StockIn Stock -
Pair of front brake discs 320 mm for Honda CBR 1000RR 2006-2007, VTR SP1 SP2 / VTR1000R RC51
Pair of front brake disc, 320 mm external diameter, specific and adaptable to the following HONDA models : CBR 1000 RR RR6, RR7 SC57 2006-2007 VTR SP1 RC51 (SC45/e4/0061) 1000 2000-2001 VTR SP2 RC51 (SC45/e4/0061) 1000 2002-2007 Measurements and list of compatibilities per motorcycle models are available below for further information. Sold by PAIR.
200,00 € In StockIn Stock -
Rear solid brake disc 220mm for many HONDA & TRIUMPH
Rear solid brake disc, model in 220 mm external diameter, specific and adaptable to many HONDA and TRIUMPH. Measurements and list of compatibilities per motorcycle models are available below for further information.
60,00 € In StockIn Stock -
Pair of Universal Heated Grips
Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).
29,00 € In StockIn Stock -
Motorcycle Tax Disc Holder, Various Colors Available
Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.
12,00 € Product available with different optionsProduct available with different options -
Anodized Universal Valve Caps
Anodised universal valve caps, different colors available. Sold by pairs.
4,00 € In StockIn Stock -
Universal Wheel Rim Tape
Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m
14,00 € In StockIn Stock -
Universal Wheel Rim Tape
Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm
14,00 € In StockIn Stock -
Universal Wheel Rim Tape
Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm
17,00 € In StockIn Stock -
Pair of Universal Grenade Valve Caps
Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.
4,00 € In StockIn Stock -
Round Bolt Covers M6 M8 M10 - Various Colors Available
Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm, for screws installed with a 8 Allen Key
0,55 € In StockIn Stock -
Hexagonal Bolt Covers 10mm 12mm 14mm - Various Colors Available
Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm
2,50 € In StockIn Stock -
PAIR OF UNIVERSAL M8 X 12,5mm SWING ARM SPOOLS
Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M8 fastening thread Honda, Kawasaki, Triumph, Suzuki, Ducati ... If you need a model with an offset for the bobbins' fastening to your swing arm, you will need the reference DIAANO8 model.
9,00 € Product available with different optionsProduct available with different options -
Anodised Aluminum Rearview Mirrors Block Off Plates Numerous HONDA
Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many HONDA models (list of compatibilities below). Sold by pairs, different colors available. Measures : 6,0 x 2,8 cm at the largest point Distance between each fastening point : 4 cm
19,00 € Product available with different optionsProduct available with different options -
Anodised Front or Rear Brake Fluid Reservoir Cap for Many Motorcycle Models
Front or rear brake fluid reservoir cap in CNC 6061 anodised aluminum, round model with integrated thread (screw model), specific for numerous HONDA models, such as CBR 600RR 2007 - 2016, 1000RR 2004 - 2018? CB1000R etc... Measures : Outer diameter : 58mm Inner diameter : 50mm
14,00 € In StockIn Stock -
Anodised Rear Brake Fluid Reservoir Cap HONDA and SUZUKI
Rear brake fluid reservoir cap in CNC 6061 anodised aluminum, rectangular model, adaptable on numerous HONDA and SUZUKI (compatibility list available below). Measures : 54 x 36 mm Distance between the opposite fastening holes: 42 mm
14,00 € In StockIn Stock -
Universal tank pad / 12 Models
6 parts universal tank pad protection, adaptable on all gas tanks.
14,00 € In StockIn Stock -
Tire Decoration Pen
Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.
9,00 € In StockIn Stock -
-
gas cap protection HONDA
OEM gas cap adhesive protection, specific for the following HONDA.
14,00 € Product available with different optionsProduct available with different options -
Pair of Rubber - Foam Handlebar Grips for 22mm Handlebar
Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
8,00 € In StockIn Stock -
Stator Engigne cover HONDA CBR 1000RR 04-07 / CB1000R
Aftermarket stator cover (left side when you are on the bike), specific to the following HONDA : CBR 1000 RR 2004 - 2005 CBR 1000-RR 2006 - 2007 CB1000-R 2008 - 2016 (different style than OEM) This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this...
59,00 € In StockIn Stock -
Front Nose Fairing for Honda CBR 1000RR 2006 -2007
Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models : CBR 1000 RR 2006 -2007
119,00 € In StockIn Stock -
Rear fairing for Honda CBR 1000 RR 2004 - 2007
Tail fairing, injected ABS quality, specific for the following models : CBR 1000RR Fireblade 2004 - 2007
99,00 € In StockIn Stock -
Rim Edge Stickers CBR 1000 RR Logo
Rim edge stickers set for motorcycle rims. Kit of 4 stickers.
8,00 € In StockIn Stock -
Smart brackets - Straps fastenings HONDA CBR 1000 RR 2004 - 2007
Pair of aluminum brackets for straps fastening, to be placed at the level of the rear foot pegs’ brackets. Specific model for the following HONDA : CBR 1000RR 2004 - 2005 CBR 1000-RR 2006 - 2007 CBR 1000 RR SP1 / SP2 2017 - 2019 These straps fastenings can also be adapted on other motorcycles’ models, as long as the distance between the rear footpegs’...
39,00 € In StockIn Stock -
Pair of clip-on handlebars 50 mm
Pair of clip on handlebars (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees
49,00 € Out of stockOut of stock -
Polycarbonate Windscreen Honda CBR 1000RR 2004 2007
Black Polycarbonate Windscreen, double curvature, specific for HONDA CBR 1000 RR from 2004 to 2007.
39,00 € In StockIn Stock -
Flush Mount LED turn signals for Honda CBR 600RR 03/14 & 1000RR 04/07
Pair of flush-mount indicators (left AND right) for HONDA from CBR 600RR 2003 to 2014 and 1000RR from 2004 to 2007 Double-sided tape model, for a direct integration in place of your original turn signals.
19,00 € In StockIn Stock -
Flush Mount LED turn signals for 600RR and 1000RR
Pair of flush-mount indicators (left AND right) for HONDA CBR 600RR 2003 - 2016 and 1000RR 2004 - 2007 Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn signals. These turn signals are E-mark.
14,00 € In StockIn Stock -
FRONT HEADLIGHT Honda CBR 1000RR 2004 / 2007
Aftermarket front headlight assembly , brand new product, specific to the following HONDA models : CBR 1000RR from 2004 to 2007
149,00 € In StockIn Stock -
Specific License Plate Holder for HONDA CBR 600RR 2003 - 2006 & CBR 1000RR 2004 - 2007
Short aluminum license plate holder specific to HONDA : CBR600RR from 2003 to 2006 CBR1000RR from 2004 to 2007
28,00 € In StockIn Stock -
Pair of Aluminum and Rubber Handlebar Grips 22 / 24mm
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
19,00 € In StockIn Stock -
LED Taillight with Integrated turn signals for Honda Cbr 600RR 03/06 1000RR 04/07
LED Taillight with integrated turn signals , specific model for Honda Cbr 600 RR from 2003 to 2006 and 1000 RR from 2004 to 2007.
39,00 € In StockIn Stock -
Pair of Anodized Aluminum Rearview Mirrors
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
59,00 € In StockIn Stock -
Pair of Universal Aluminum Rearview Mirrors Block Off Plates for Honda RR and BMW S1000RR
Pair of universal aluminum rearview mirrors block off plates for many HONDA and BMW models : RR and S1000 RR models. Measurements : 6,1 x 2,1 cm
9,00 € In StockIn Stock -
Pair of Universal Aluminum Rearview Mirrors Block Off Plates for Sportbikes
Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm
9,00 € In StockIn Stock -
Aluminum Quarter Turn Fasteners
Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener Available in the following dimensions: 14mm, 17mm Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units
3,00 € In StockIn Stock -
Pair of Universal Fork Preload Adjusters
Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm
9,00 € In StockIn Stock -
Carbon Covering Vinyl Film Available in Various Colors
3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe
12,00 € In StockIn Stock -
Complete Fairings Fastening Hardware Set Honda CBR 1000RR 2004/2005
Complete fairings fastening hardware set, specific for Honda CBR 1000RR from 2004 to 2005. Also compatible with CBR 1000RR from 2006 to 2007
63,00 € Out of stockOut of stock -
Pair of brake and clutch levers guards in anodised aluminum
Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.
39,00 € Product available with different optionsProduct available with different options -
Racing Gas Cap for Honda
RACING gas cap in aluminum suitable for many HONDA models.
39,00 € In StockIn Stock -
Pair of Aluminum Rearview Mirrors
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
59,00 € In StockIn Stock -
Pair of Swing Arm Spools Honda CBR RR and BMW S1000RR
Pair of swing arm spools with a laser logo, adaptable on all the HONDA CBR RR and BMW S1000RR.
15,00 € In StockIn Stock -
Oil Filler Cap for Honda CBR RR
Oil filler cap in aluminium, with laser-engraved logo, adaptable on many HONDA CBR RR.
10,00 € In StockIn Stock -
Complete Fairings Fastening Hardware Set Honda CBR 1000RR 2006/2007
Complete fairings fastening hardware set, specific for HONDA CBR 1000 RR from 2006 to 2007
63,00 € In StockIn Stock -
Honda 1000RR 04 / 07 Rearsets
Complete kit of rear-sets, specific for the following HONDA : CBR 1000 RR from 2004 to 2007. The rear brake switch (maintaining the lighting of the tail light when braking) is supplied with the kit.
199,00 € In StockIn Stock -
Pair of Aftermarket Rearview Mirrors HONDA CBR 600RR 2003 - 2016 & 1000RR 2004 - 2007 & CBR 600 F 2011 - 2014
Pair of aftermarket rear view mirrors, built based on the OEM models, specific for the following HONDA models : CBR 600 RR from 2003 to 2006 CBR 1000 RR from 2004 to 2007 CBR 600 F from 2011 to 2014 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.
28,00 € In StockIn Stock -
Pair of Round Bar End Rearview Mirrors
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
59,00 € In StockIn Stock -
Engine Cover Crash Pad HONDA CB1000R and CBR 1000RR 2006 - 2007
Engine cover protection crash pads specific for the following HONDA models : CB1000R from 2008 to 2017 CBR 1000 RR from 2006 to 2007 Designed for right side crankcase and left side crank case
79,00 € In StockIn Stock -
Upper Fairing Stay Bracket for HONDA CBR 1000 RR 2004 - 2007
Aftermarket front fairing bracket, built in aluminum based on the OEM model, specific for the following HONDA : CBR1000RR from 2004 to 2007
69,00 € Out of stockOut of stock -
Universal Booster Net
Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm
4,00 € In StockIn Stock -
Pair of Universal LED Turn Signals with White Rear Light
Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!
14,00 € In StockIn Stock -
Pair of Universal Mini LED Turn Signals
Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!
14,00 € In StockIn Stock -
Pair of Bar End Rearview Mirrors in Anodised Aluminum
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
59,00 € In StockIn Stock -
Pair of Handlebar Caps - Bi Color Design
Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...
14,00 € In StockIn Stock -
Pair of Handlebar Caps - Bevel Design
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...
19,00 € In StockIn Stock -
Pair of Front Footpegs for HONDA CBR 600RR 1000RR 2003 - 2007
Pair of front footrests, aftermarket model based on the OEM, specific for the following HONDA models : CBR 600 RR from 2003 to 2006 CBR 1000 RR from 2004 to 2007 Perfect adaptability for sportsbikes, also adaptable to roadsters. If you’re having doubts, compare your current footpegs with the pictures in this description (notably for the fastenings or...
24,00 € In StockIn Stock -
Universal Anodised Aluminum Hinged Brake Fluid Reservoir Bracket
Multi-position hinged brake fluid reservoir bracket in anodized aluminum.
12,00 € In StockIn Stock -
Universal USB Charger / Cigarette Lighter Plug
USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.
14,00 € In StockIn Stock -
Rear Brake Pedal for HONDA CBR 1000 RR 2004 - 2007
Aftermarket rear brake pedal, specific for the following HONDA models : CBR1000RR from 2004 to 2007
29,00 € In StockIn Stock -
Gear Shift Lever HONDA CBR 600RR 2003 - 2017 & 1000RR 2004 - 2016
Aftermarket gear shift lever or pedal, specific for the following HONDA models : CBR 600 RR 2003 - 2017 CBR 1000 RR 2004 - 2016
29,00 € Out of stockOut of stock -
Front Footrest Bracket for HONDA CBR 1000RR 2004 - 2007
Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following HONDA models : CBR 1000 RR from 2004 to 2007 Sold by pairs, including right and left foot pegs.
69,00 € In StockIn Stock -
Rear Footrest Bracket HONDA CBR 1000RR 2004 - 2007
Rear footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following HONDA models: CBR 1000 RR from 2004 to 2007 Sold by pairs, including left foot-peg and right foot peg.
49,00 € In StockIn Stock -
Pair of Rear Footpegs for many HONDA CBR 600RR and 1000RR
Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific for many HONDA CBR 600 RR and CBR 1000 RR. If the fastening system is not provided or if the one you received is not perfectly adaptable to your motorbike, you just need to recover the ones from your old footpegs to assemble these new ones ! Sold by pairs, right foot peg and...
24,00 € In StockIn Stock -
Pair of Aluminum Rearview Mirrors with Integrated Turn Signals
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
69,00 € In StockIn Stock -
Aftermarket Brake Fluid Reservoir Kit
Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...
14,00 € In StockIn Stock -
Upper triple tree clamp Protection Honda CBR 1000RR 2004 / 2007
Adhesive protection for the upper triple tree clamp, specific model for the following Honda CBR 1000 RR from 2004 to 2007. Color: Carbon
9,00 € In StockIn Stock -
Anodised Rear Brake or Clutch Fluid Reservoir Cap for Numerous Motorcycle Models
Rear brake or clutch fluid reservoir cap in CNC 6061 anodised aluminum, round model, adaptable on numerous motorcycle models (compatibility list available below). Inner diameter (thread) : 3,48 cm NOTE : The design of the cap that you will receive will be slightly different from the one displayed on pictures.
9,00 € Product available with different optionsProduct available with different options -
Universal Anodised Aluminum Brake Fluid Reservoir Bracket
Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...
9,00 € In StockIn Stock -
Auxiliary LED Lamp Head Light
Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.
19,00 € Out of stockOut of stock -
Aluminium Anodized Hardware Kit
Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.
29,00 € Out of stockOut of stock -
Pair of LED License Plate Lights to be Screwn
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. . Sold by pair only.
6,00 € In StockIn Stock -
Screw and Cage Nut
Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.
2,00 € In StockIn Stock -
Motocycle Key Ring
Motorcycle-design key ring, different models available.
2,00 € Out of stockOut of stock -
Universal USB Plug / Socket
Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system. Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm
14,00 € In StockIn Stock -
Pair of Handlebar Caps - Design 2
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...
19,00 € In StockIn Stock -
Pair of Aluminum / Plastic Rearview Mirrors
Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...
69,00 € In StockIn Stock -
Pair of Frame Sliders / Crash Pads for HONDA CBR1000RR 2006 - 2007
Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following HONDA : CBR 1000 RR from 2006 to 2007
64,00 € In StockIn Stock -
PAIR OF ANODISED ALUMINUM M8 SWING ARM SPOOLS
Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M8 fastening thread, for example : Honda, Kawasaki, Triumph, Suzuki, Ducati ...
19,00 € In StockIn Stock -
Seat cowl HONDA CBR 1000 RR 04 / 07
Seat cowl in Injection ABS, brand new and specific for the following BMW : CBR 1000RR from 2004 to 2007. + 10€ extra for color models (other than black and white). Please check pictures to control the exact color you will receive. We do not guarantee that the color shade will bethe same as OEM.
44,00 € In StockIn Stock -
Rear Passenger Seat Pillion for HONDA CBR 1000RR 2004 - 2007
Rear passenger seat pillion, brand new model, adaptable on the following HONDA models : CBR 1000 RR from 2004 to 2007.
49,00 € Out of stockOut of stock -
Quick Release Gas Cap HONDA
Quick release (1/4 turn) gas cap in anodised aluminum, specific for the many HONDA models. Sold with a spare seal and the necessary hardware. CAUTION ! Not compatible with Honda's new gas hatches, including CBR 1000 RR SP, CBR 650 2017 (...), A doubt? Your gas cap must be as shown in photo 6.
44,00 € In StockIn Stock -
Pair of Aluminum and Rubber Handlebar Grips 22 / 24mm - New Design
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
19,00 € In StockIn Stock -
Rearview Mirrors Adapters for Sportbikes / Sport GT Motorcycles
Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below
9,00 € In StockIn Stock -
Pair of Triangle Shape Bar End Rearview Mirrors
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
59,00 € Out of stockOut of stock -
Pair of Bar End Rearview Mirrors Design 1
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
59,00 € Product available with different optionsProduct available with different options -
Pair of Bar End Rearview Mirrors with Small Adjustable Arms
Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.
59,00 € Product available with different optionsProduct available with different options -
Aftermarket Rear Brake Fluid Reservoir
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)
12,00 € In StockIn Stock -
Pair of Handlebar Caps - Flat Design
Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...
14,00 € In StockIn Stock -
Anodized aluminum passenger hand grip HONDA
Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous HONDA models. Available in different colors, hardware included. CAUTION : if you plan on mounting it on a 1100XX or 1000RR 2012 + you will need some spacers to rise the hand grip. Without these spacers, your passenger may not have enough space to slip his or her...
59,00 € In StockIn Stock -
Double-side Universal LED Turn Signals
Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!
14,00 € Out of stockOut of stock -
Relax Cruise Control Throttle Grip
Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.
1,00 € In StockIn Stock -
Mechanical Watch for Installation on Handlebars
Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars Battery not included.
14,00 € In StockIn Stock -
Adhesive tank side traction pads Honda CBR 1000RR 2004-2007
Pair of adhesive tank traction pads, to be installed on the flanks of the tank. Specific modelfor Honda CBR1000RR 2004-2007 Sold by pair.
24,00 € In StockIn Stock -
Pair of Racing Rearview Mirrors Design 3
Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
34,00 € In StockIn Stock -
Pair of Anodised Aluminum Rearview Mirrors - Triangle Shape
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
59,00 € In StockIn Stock -
Pair of Brown Rubber Grips - Cafe Racer Design
Pair of Brown rubber grips , Cafe-Racer Design, universal for all motorcycles equipped with a 22mm external diameter handlebar. Sold by pair. Different colors / styles available ( Light Brown , Dark Brown )
12,00 € In StockIn Stock -
Pair of Black rubber grips - Cafe Racer Design
Pair of Black rubber grips , Cafe-Racer Design , universal for all motorcycles equipped with a 22mm diameter handlebar. Sold by pair. Different colors / styles available.
12,00 € In StockIn Stock -
LED License plate light (6 SMD) without threaded screws
Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm
9,00 € In StockIn Stock -
Inner Wheel Rims Stickers - RACING Model
Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.
19,00 € In StockIn Stock -
Inner Wheel Rims Stickers - CBR Model
Kit of adhesive tapes for the inner rim (front and rear). Model with CBR logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.
19,00 € Out of stockOut of stock -
Tank Pad Protection - "CBR" Model
Adhesive tank pad protection, design CBR Different colors available – You choose !
14,00 € In StockIn Stock -
Complete Fairings Fastening Hardware Set Honda CBR 1000 RR 2006 - 2007
Complete fairings fastening hardware set, specific for HONDA : CBR 1000RR Fireblade 2006 - 2007
49,00 € In StockIn Stock -
-
Colored Smiley Decorative Screw
A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.
4,00 € Product available with different optionsProduct available with different options -
Decorative screw with colored washer
Decorative screw with anodised colored washer. M6x16mm
1,50 € In StockIn Stock -
Decorative screw with colored offset
Decorative anodised screw with colored offset.
2,50 € Product available with different optionsProduct available with different options -
Foldable rubber funnel in various colors
Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.
4,00 € Product available with different optionsProduct available with different options -
TORX Anodised Aluminium Hardware Kit
Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets. Kit available with or without fairings fastening plastic clips.
39,00 € Product available with different optionsProduct available with different options -
Pair of Teflon Protection Sliders for Honda CBR 1000 RR 2006 - 2007
Pair of sliders, Teflon protective pads, specific to HONDA : CBR 1000RR 2006 - 2007 Sold by pairs.
39,00 € In StockIn Stock -
Front Driver Seat HONDA CBR 1000 RR 2004 - 2007
Front pilot seat, brand new model, adaptable on all the HONDA : CBR 1000RR 2004 - 2005 CBR 1000-RR 2006 - 2007
69,00 € In StockIn Stock -
Keychain Different Models and Designs HONDA
HONDA Keyrings - different models and designs available.
2,00 € In StockIn Stock -
Universal Wheel Rim Tape
Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.
5,00 € In StockIn Stock -
Pair of Aluminum / Plastic Rearview Mirrors with Integrated Turn Signals
Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).
24,00 € In StockIn Stock -
Xenon Lighting Kit HONDA
12V , 35W xenon lighting kit, specific for many HONDA models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit. IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses...
29,00 € Product available with different optionsProduct available with different options -
LED Lighting Kit HONDA
LED Lighting Kit specific for many HONDA. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit. IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses and will depend on the OPTION...
78,00 € In StockIn Stock
