Catalog

Availability
ZZR 600 1994-2003

ZZR 600 1994-2003 

  • Steering stem nut for many KAWASAKI models. You will find the motorcycles compatibility list below.    Technical informations : Nut : M22x1 Necessary tools for installation : 32 wrench key Depth of the threaded part : 10 mm Maximum depth of the nut : 14 mm Tightening Torque : 90Nm

    19,00 € In Stock
    In Stock
  • Front Brake fluid reservoir cap for many KAWASAKI models.   You will find the motorcycles compatibility list below.

    19,00 € In Stock
    In Stock
  • Rear-view mirrors block-off plates for many KAWASAKI models. You will find the motorcycles compatibility list below.    Distance between the fastening points : 28 mm     Sold by pair.

    29,00 € In Stock
    In Stock
  • Rear foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock
  • Front foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be...

    39,00 € Product available with different options
    Product available with different options
  • Front foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be...

    44,00 € In Stock
    In Stock
  • Rear foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    44,00 € In Stock
    In Stock
  • LED rear Taillight , specific model for Kawasaki ZZR 600 from 1993 to 2005 and ZZR 1100 from 1993 to 2001.  

    34,00 € In Stock
    In Stock
  • LED Taillight with integrated turn signals, specific model for Kawasaki ZZR 600 from 1993 to 2005 and ZZR 1100 from 1993 to 2001.

    44,00 € In Stock
    In Stock
  • Short brake lever specific to many models. Detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comment before you finalize the order

    27,00 € In Stock
    In Stock
  • Long brake lever specific to many models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comments before finalizing the order.

    27,00 € In Stock
    In Stock
  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many models. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’ section before you...

    37,00 € In Stock
    In Stock
  • Short clutch lever specific to many KAWASAKI models, with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment...

    27,00 € In Stock
    In Stock
  • Long clutch lever specific to many KAWASAKI models with cable clutch system. Detailed list of compatibilities per model of motorcycle available below. If you want a colour combination (body and adjusting wheel) that is not proposed in the list below, please specify your choice (within the 8 colours we have) in your order's comment's section.

    27,00 € In Stock
    In Stock
  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many KAWASAKI models with cable clutches. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock
  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock
  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock
  • License plate light (3 LED).

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In Stock
    In Stock
  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 41mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € Out of stock
    Out of stock
  • Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

    9,00 € Product available with different options
    Product available with different options
  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Full fairing kit, unused, Injected ABS quality, specific for the following KAWASAKI models :    ZZR600 from 1994 to 2003    The first picture shows the color of the fairing kit you will receive (different colors available). Free delivery with this fairing kit, sent with a tracking number, insurance and sign-upon receipt

    560,00 € Product available with different options
    Product available with different options
  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock
  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Universal wheel rim tape. AVDB Moto racing model.   MODEL 1 : Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.    MODEL 2 : Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.

    7,00 € In Stock
    In Stock
  • Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 41mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    79,00 € In Stock
    In Stock
  • Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 41mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    109,00 € Out of stock
    Out of stock
  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € In Stock
    In Stock
  • Pair of rear flashers covers (right AND left lenses), specific for KAWASAKI :   ZZ-R 600 / ZX-6 1993 - 2005    Halogen bulbs are not included. If you want the lenses and their lighting, we also offer LED bulbs (orange lighting). They are proposed at the bottom of the page, or you can find them under the reference AAL13.

    19,00 € In Stock
    In Stock
  • Pair of aftermarket front turn signals (left AND right), specific for KAWASAKI :   ZZ-R 600 / ZX-6 1993 - 2005    Two types of lighting: halogen bulbs model (not supplied) or model with integrated LED panel, to be connected to the original bulb holder. These turn signals are E-mark.

    29,00 € In Stock
    In Stock
  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock
  • Rear solid wave shape brake disc, model in 240 mm external diameter, specific and adaptable to many KAWASAKI. List of compatibilities per motorcycle models are available below for further information.   MEASUREMENTS: External diameter : 240 mm Internal diameter : 100 mm Thickness : 5 mm Mounting holes : 4 Mounting holes' diameter : 10,4 mm Distance...

    60,00 € In Stock
    In Stock
  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs. Universal, bronze color model. Fits on all handlebars with an internal diameter of 18mm (adapters provided), non threaded in order to fit the rubber adapters. WARNING: These bar-end plugs are NOT compatible with KAWASAKI OEM handlebars

    9,00 € In Stock
    In Stock
  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € In Stock
    In Stock
  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In Stock
    In Stock
  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock
  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € In Stock
    In Stock
  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € In Stock
    In Stock
  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock
  • M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    5,00 € In Stock
    In Stock
  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock
  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M10 fastening thread Caution : for some KAWASAKI, adding a spacer or washers (non included) is mandatory for a tight fastening. In this case, you will need to purchase the model with DIAANO10 reference.

    9,00 € In Stock
    In Stock
  • Oil filler cap in CNC 6061 anodised aluminium, adaptable on numerous KAWASAKI (compatibility list below).  Outer diameter : 39,5mm  Inner diameter (thread) : 29mm 

    15,00 € Product available with different options
    Product available with different options
  • Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many YAMAHA models (list of compatibilities below). Will also fit on many SUZUKI produced before 2002, with the same measures as these block off caps, but you will need to retrieve the OEM nuts. Sold by pairs. Measures : 7,6 x 3,5 cm at the largest pointDistance...

    19,00 € Product available with different options
    Product available with different options
  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € In Stock
    In Stock
  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock
  • OEM gas cap adhesive protection specific KAWASAKI.   Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.

    14,00 € In Stock
    In Stock
  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length : 120 mm Depth : Hollow (empty) Diameter: 32 mm   Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock
  • Aftermarket stator cover (left side when you are on the bike), specific to the following KAWASAKI : ZZR600 1990 - 1993 ZZR-600 1994 - 2003 This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this crankcase cover.  

    59,00 € In Stock
    In Stock
  • Rim edge stickers set for motorcycle rims. Kit of 8 stickers.  

    8,00 € In Stock
    In Stock
  • Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models :   ZZR 600  & 400 1993-2001 ZX-600 1993-2001

    129,00 € In Stock
    In Stock
  • Tail fairing, injected ABS quality, specific for the following KAWASAKI :    ZZR-600 1994 - 2003 ZZR-400

    99,00 € In Stock
    In Stock
  • M8 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 6 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock
  • M10 Screw covers in anodized aluminium, available in different colours. For flat screw heads, fastened with an Allen key.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock
  • Radiator, racing model, specific for following KAWASAKI  :     ZZR 600 / ZX600 1993 - 2004   

    129,00 € In Stock
    In Stock
  • Throttle pull and/or push cable specific for KAWASAKI :  KAWASAKI ZZR 600 1990 - 2002 Sold per unit, or as a complete kit with both (push and pull cables).   

    29,00 € Out of stock
    Out of stock
  • Speedometer cable, specific for KAWASAKI :    ZX6 1990 - 1997 ZZR 1100 1990 - 2001     Sold per unit.   

    19,00 € In Stock
    In Stock
  • Pair of front wave brake discs, model in 300 mm external diameter, specific and adaptable to many KAWASAKI. List of compatibilities per motorcycle models are available below.   MEASUREMENTS: External diameter: 300 mm Internal diameter: 61 mm Thickness: 5 mm Mounting holes: 5  Mounting holes' diameter: 10,4 mm Distance between opposite mounting holes: 81...

    200,00 € In Stock
    In Stock
  • Adhesive tank pad protection, design NINJA.

    17,00 € In Stock
    In Stock
  • Adhesive tank pad protection, design ZZR.

    17,00 € In Stock
    In Stock
  • Wheel rim tape with ZZR logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.   Width : about 1 cm.

    14,00 € In Stock
    In Stock
  • Wheel rim tape with NINJA logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.   Width : about 1 cm.

    14,00 € In Stock
    In Stock
  • Pair of clip on handlebars (right AND left clip ons) designed for 41mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees

    49,00 € Out of stock
    Out of stock
  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow (empty) Diameter: 34,5 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock
  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € Out of stock
    Out of stock
  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock
  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock
  • Universal aluminium license plate holder, adjustable and foldable.

    29,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock
  • Pair of bar end plugs in aluminum, with "Ninja" logo engraved. Sold with their mounting screw. Bar end plug length : 45mm Diameter : 31mm Bar end plug weight (without screw) : 72g

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Brake and / or clutch fluid reservoir cap with laser-engraved logo, adaptable on many KAWASAKI models. Sold by unit.

    10,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of front footrests, aftermarket model based on the OEM, specific for the following for many KAWASAKI (see compatibility list below). Caution : these foot-pegs will perfectly, but in some case the provided hardware may not be a perfect match (depending on the motorcycle model). If so simply re-use the hardware from your past footpegs on ours. Sold by...

    24,00 € In Stock
    In Stock
  • Polycarbonate Windscreen, double curvature, specific for the following KAWASAKI models : ZZR600 from 1994 to 2003.

    39,00 € Out of stock
    Add to cart
    Out of stock
  • Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version. These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8). Sold by pair (left AND right mirror).

    34,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock
  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € Product available with different options
    Product available with different options
  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock
  • USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    14,00 € In Stock
    In Stock
  • Aftermarket gear shift pedal with foldable tip, same form and fitment as the OEM one, specific to the following KAWASAKI :  ZX6-R from 1998 to 2004 ZX9-R from 1998 to 2003 ZZR600 from 1994 to 2003 (CAUTION : the current model is in silver color)

    29,00 € In Stock
    In Stock
  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock
  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock
  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock
  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. Sold by pair only.

    6,00 € Out of stock
    Add to cart
    Out of stock
  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock
  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock
  • Universal phone holder with handlebar mounting bracket. Min and max width of the phone holder : Min: 57mm Max: 87mm

    14,00 € Out of stock
    Add to cart
    Out of stock
  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock
  • Ram air intake in injection ABS, specific to the following KAWASAKI models : ZZR-600 from 1994 to 2003

    79,00 € In Stock
    In Stock
  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth: 117 mm Diameter: 31 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock
  • Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below

    9,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € In Stock
    In Stock
  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock
  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock
  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock
  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    In Stock
  • Aftermarket rear brake pedal, specific for the following KAWASAKI models : ZX6-R from 1998 to 2002 ZX9-R from 1998 to 2002 ZZR-600 from 1993 to 2001 ZZR-400 / ZXR400 from 1993 to 2001

    29,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock
  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    In Stock
  • Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock
  • Kit of adhesive tapes for the inner rim (front and rear). Model with NINJA logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € Out of stock
    Out of stock
  • Decorative sticker with NINJA logo.

    5,00 € In Stock
    In Stock
  • Decorative sticker with ZZR logo.

    4,00 € In Stock
    In Stock
  • Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available : S (123 x 60mm interior) M (140 x 80mm interior) L (165 x 87mm interior)  2 types of fastenings (handlebar or screw). Sold in kit: phone cover and fixing system.

    17,00 € In Stock
    In Stock
  • A M10 decorative screw that will give you energy even on a Monday morning ! Right side thread (standard). Sold by pair.

    4,00 € In Stock
    In Stock
  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € Out of stock
    Out of stock
  • Decorative anodised screw with colored offset.

    2,50 € In Stock
    In Stock
  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock
  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € In Stock
    In Stock
  • 12V , 35W xenon lighting kit, specific for many KAWASAKI models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual.

    34,00 € In Stock
    In Stock
  • KAWASAKI Keyrings - different models and designs available.

    2,00 € In Stock
    In Stock
  • Aftermarket cover for original speedometer, brand new and specific for the following KAWASAKI models :    ZZR-600 1994 - 2004 ZZR-400    Sold as displayed on pictures.

    69,00 € In Stock
    In Stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock
  • Waste tube, cables or pipes bracket in anodised aluminum, universal model adaptable to many motorcycle and scooter models. Sold per unit, various colours available.

    9,00 € In Stock
    In Stock
  • LED auxiliary light, universal modell with fastening for handlebars with a 22 or 28mm external diameter. Excellent lighting quality, white colour.   Sold by pairs, these lighting spots are ultra resistant, almost unbreakable !

    99,00 € In Stock
    In Stock
  • Easy-pull clutch system in anodised aluminum. To be installed between the clutch lever and cable to reduce the effort to pull your clutch lever in.   Installs on all motorcycles with cable clutch system.

    29,00 € In Stock
    In Stock
  • Decorative sticker with NINJA logo.

    4,00 € In Stock
    In Stock
  • Decorative sticker with ZZR logo.

    4,00 € In Stock
    In Stock
  • Holder for phone, GPS / navigation system or radar alarm. Sold as a kit : holding bracket for the phone, with its USB charger + fixing system. Several types of fixing available: - Handlebar mounting bracket (diameter 15 mm)- Screw mounting pad (for screw diameter 8 or 10 mm) All necessary technical information can be found below in the description.

    24,00 € In Stock
    In Stock
  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € Product available with different options
    Product available with different options
Showing 1 - 131 of 131 items