The indispensable 

There are 31 products.
39,00 €

Flat handlebar in anodised machined aluminum. Universal model. Length : 76 cm Outer diameter at the handlebar’s end: 22,2 mm Outer diameter in the center of the handlebar: 22,2mm (often indicated as 22 mm) Inside diameter: 14 mm, not threaded Important: Not suitable for motorcycles having a wide or modified riser to receive a 28mm handlebars.

19,00 €

Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

44,00 €

Flat handlebar in anodised machined aluminum. Universal model. Length : 76 cm Outer diameter at the handlebar’s end: 22,2 mm Outer diameter in the center of the handlebar: 28,6mm (often indicated as 28 mm) Inside diameter: 14 mm, not threaded Important: Not suitable for motorcycles having a riser designed to receive a 22mm handlebar.

9,00 €

Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

14,00 €

Adhesive tank pad in 6 parts, available in different colors and designs.  Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

3,00 €

Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

9,00 €

Universal anodised aluminum right-angle valve stems. Diameter: 8.3 mm Important : suitable for Italian and English models, however this model is NOT suitable for Japanese brands, which usually need an 11.3 mm diameter. Sold by pair.

12,00 €

Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

59,00 €

Pair of racing rearview mirrors in CNC anodized aluminum for Sportsbikes and Roadsters / Naked bikes.

35,00 €

Full pack containing : - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

15,00 €

Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

1,25 €

Windscreen fastening screws in anodised aluminum. Sold individually (1 screw + washer + threaded rubber). Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Purchase from 4 units minimum.

34,00 €

Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

2,00 €

Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

44,00 €

Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

19,00 €

Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

9,00 €

Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

9,00 €

Pair of rearview mirrors extension offset, universal model for Naked motorbike mirrors (fastening on the handlebars). Suitable for many racing mirrors we propose on our catalogue. In case of doubt, contact us ! Allows to extend the rear-view mirrors by 4,2cm on the sides !

32,00 €

Universal aluminum exhaust muffler bracket. Caution : this model will not fit on exhaust systems without adjustable muffler clamps

16,00 €

Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

13,00 €

Universal Small LED Tail light, including license plate light.   Dimensions: 65 mm x 30 mm x 15 mm  Thickness: 25 mm

9,00 €

Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. 2 LEDs lights on each piece. Sold by pair only.

19,00 €

Universal phone holder with handlebar mounting bracket. Min and max width of the phone holder : Min: 57mm Max: 87mm

19,00 €

Crash pad or frame slider (protection ball) in Teflon and CNC anodised aluminum. Sold per unit, without bolt or fastening base.

49,00 €

Pair of universal handguards, various colours available. Aluminum base with an ultra-hard plastic coating for an optimal shock-resistance.  Fit on all handlebars with an external diameter of 22 mm or 28 mm and an internal diameter of 14 mm, 18 mm or threaded for M8 screws (8 mm diameter thread) Sold by PAIR only, hardware included

20,00 €

No gift idea? Offer an AVDB Moto voucher gift card ! You want to do well but you have doubts about the accessory you want to offer? Worried that the person you want to make the purchase for may already have it, or that the color may not be the right one ? Then this Gift Card is the solution. The beneficiary will have the choice among all the accessories...

29,00 €

2 in 1 system : phone holder equipped with an integrated charger and its USB socket. Universal mounting bracket, designed for an installation on handlebars from 22 to 28 mm external diameter. Measures: Holder alone: 12.3 x 6.2 x 1.8 cm MAX possible width for the phone holder: 9.3 cm Offset between handlebars and phone holder: 5.5 cm Length of the...

15,00 €

Insulating tape (5cm x 10m) for exhaust systems (collectors - tapered tubes / link pipes) Kit composition: 1 thermal band in braided fiber (5cm wide x 10m long) 6 clamping clips  Available colors : Black / Copper

17,00 €

Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available (S, M and L) and 2 types of fastenings (handlebar or screw).   Sold in kit: phone cover and fixing system.

Showing 1 - 31 of 31 items