> >>>ZX6R 2009-2012

Catalog

Availability
ZX6R 2009-2012

ZX6R 2009-2012 

  • Steering stem nut for many KAWASAKI models. You will find the motorcycles compatibility list below.    Technical informations : Nut : M28x1 Necessary tools for installation : 34 wrench key Depth of the threaded part : 13.8 mm Maximum depth of the nut : 17 mm Tightening Torque : 520 Nm

    19,00 € In Stock
    In Stock

  • M51x4 Front Brake fluid reservoir cap for many KAWASAKI models.    You will find the motorcycles compatibility list below.

    15,00 € In Stock
    In Stock

  • M37x4 Rear Brake fluid reservoir cap for many KAWASAKI models.    You will find the motorcycles compatibility list below.

    14,00 € In Stock
    In Stock

  • Rear-view mirrors block-off plates for many KAWASAKI models. You will find the motorcycles compatibility list below.   Distance between the fastening points : 47mm   Sold by pair.

    24,00 € In Stock
    In Stock

  • Front foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be...

    39,00 € In Stock
    In Stock

  • Rear foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock

  • Short brake lever specific to many KAWASAKI models. The detailed list of compatibilities per motorcycle and Year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the...

    27,00 € In Stock
    In Stock

  • Long brake lever specific to many KAWASAKI models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section before you...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many KAWASAKI models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), you can specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock

  • Short clutch lever specific to many KAWASAKI models with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the...

    27,00 € In Stock
    In Stock

  • Long clutch lever specific to many KAWASAKI models with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many KAWASAKI models with cable clutches. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors...

    37,00 € In Stock
    In Stock

  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock

  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • License plate light (3 LED).

    9,00 € In Stock
    Add to cart
    In Stock

  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

    9,00 € In Stock
    In Stock

  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock

  • Full fairing kit, unused, Injected ABS quality, specific for the following models : KAWASAKI ZX6-R from 2009 to 2012.

    650,00 € In Stock
    In Stock

  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Engine cover protection set in hard plastic and nylon fiber, specific to the following KAWASAKI models : ZX6-R from 2009 to 2012 ZX-6R 636 from 2013 to 2020 Preferential price for the complete kit, including engine sliders for : Alternator (left side), Clutch (right side) and Starter (right side). Each of these protections is also available per unit.

    119,00 € In Stock
    In Stock

  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock

  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White

    7,00 € Product available with different options
    Product available with different options

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description) Sold by pairs. Resistors included for free with the...

    29,00 € In Stock
    In Stock

  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • AVDB by Jealou'S" Water radiator guard, specific for the OEM radiators of the following KAWASAKI models : ZX-6R 600 2007 - 2008 ZX6R 600 2009 - 2012 ZX6-R 636 2013 - 2018 ZX6R 2019 - 2020

    49,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of AVDB rearsets specific for the following KAWASAKI models :   ZX6-R 600 2009 - 2012 ZX-6R 636 2013 - 2018 ZX6R 636 2019 - 2020   Sold by pair only (right and left rearset).

    149,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.

    19,00 € In Stock
    Add to cart
    In Stock

  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 51mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € In Stock
    In Stock

  • Front wheel rim sold per unit , in 6061 T6 aluminum, specific for the following KAWASAKI models :   ZX-6R 636 2005 - 2006 ZX6-R 2007 - 2008 ZX6 R 2009 - 2012 ZX-10R 2006 - 2007     Price also includes delivery through registered and delivered upon signature parcel. The text below should answer most of your question, if you still have doubts do not...

    329,00 € Out of stock
    Out of stock

  • Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 51mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    79,00 € In Stock
    In Stock

  • Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 51mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    109,00 € In Stock
    In Stock

  • 2 function universal LED turn signals with position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • YOSHIMURA USA, TRC, slip on exhaust with Stainless Steel muffler, specific to KAWASAKI : ZX6-R from 2009 to 2012 Displayed price includes signed for upon receipt delivery (tracked parcel).

    500,00 € In Stock
    Add to cart
    In Stock

  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € In Stock
    In Stock

  • Pair of aftermarket front turn signals (left AND right), specific for KAWASAKI.. Two colors of glass cover: clear (Transparent) and tinted (black smoke). Two types of lighting: halogen bulbs (not supplied) or with integrated LED panel, to be connected to the OEM bulb holder. These turn signals are E-mark. Caution : on some models, these turn signals may...

    29,00 € In Stock
    In Stock

  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock

  • Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.

    4,00 € In Stock
    In Stock

  • Full pack containing : - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

    35,00 € In Stock
    Add to cart
    In Stock

  • Pair of front brake disc, 300 mm external diameter, specific and adaptable to the many YAMAHA models. Measurements and list of compatibilities per motorcycle models are available below for further information. Sold by PAIR.

    200,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock

  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € Product available with different options
    Product available with different options

  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In Stock
    In Stock

  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € In Stock
    In Stock

  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € In Stock
    In Stock

  • Rear solid brake disc, model in 220 mm external diameter, specific and adaptable to many KAWASAKI. Measurements and list of compatibilities per motorcycle models are available below for further information.    Sold per UNIT.

    60,00 € In Stock
    Add to cart
    In Stock

  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock

  • Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm,  for screws installed with a 8 Allen Key

    0,55 € In Stock
    In Stock

  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock

  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M10 fastening thread Caution : for some KAWASAKI, adding a spacer or washers (non included) is mandatory for a tight fastening. In this case, you will need to purchase the model with DIAANO10 reference.

    9,00 € In Stock
    In Stock

  • Aftermarket front headlight assembly , brand new product, specific to the following KAWASAKI models : ZX6-R 2009-2012 & ZX10-R 2008-2010

    199,00 € In Stock
    In Stock

  • Oil filler cap in CNC 6061 anodised aluminium, adaptable on numerous KAWASAKI (compatibility list below).  Outer diameter : 39,5mm  Inner diameter (thread) : 29mm 

    15,00 € In Stock
    In Stock

  • Front or rear brake fluid reservoir cap in CNC 6061 anodised aluminum, round model with integrated thread (screw model), specific for numerous HONDA models, such as CBR 600RR 2007 - 2016, 1000RR 2004 - 2018? CB1000R etc...   Measures :  Outer diameter : 58mm Inner diameter : 50mm

    14,00 € Product available with different options
    Product available with different options

  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € In Stock
    In Stock

  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock

  • 9,00 € In Stock
    In Stock

  • OEM gas cap adhesive protection specific KAWASAKI.   4 different models available, depending on your motorcycle's generation. Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility.

    14,00 € In Stock
    In Stock

  • Aftermarket stator cover (left side when you are on the bike), specific to the following KAWASAKI : ZX6-R / 636 2009 - 2018 ZX6R 636 2019-2020 This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this crankcase cover.

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock

  • Aftermarket Clutch / Starter crankcase cover (right side when you are on your motorbike),specific to the following KAWASAKI: ZX6-R 600 2009 - 2012 ZX-6R 636 2013 - 2018 ZX6R 636 2019 - 2020 The clutch engine cover includes the Intermediate case for the ignition. For this model, you can either get both crankcases (gear and ignition) as a pack, or separately.

    39,00 € In Stock
    In Stock

  • Rim edge stickers set for motorcycle rims. Kit of 4 stickers.  

    8,00 € In Stock
    Add to cart
    In Stock

  • Transparent turn signals spacers adapters in transparent plastic, specific for a large majority of KAWASAKI models (see compatibility list below). For measures, please see pictures.

    2,00 € In Stock
    In Stock

  • Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following KAWASAKI :   ZX-6R 2009 - 2012 ZX-6R 636 / ZX6RR  2013 - 2017  ZX-6R 636 2019 - 2020    Note : pictures accurately display the kit, as you will receive it. Only the shaft rod can, in some case, slightly change depending on the motorcycle model.

    49,00 € In Stock
    Add to cart
    In Stock

  • Rim edge stickers set for motorcycle rims. Kit of 8 stickers.  

    8,00 € In Stock
    Add to cart
    In Stock

  • Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models :  ZX-6R 2009 - 2012

    109,00 € In Stock
    In Stock

  • Tail fairing, injected ABS quality, specific for the following models :   ZX6-R 2009 - 2012

    189,00 € In Stock
    In Stock
  • New

    Pair of aluminum brackets for straps fastening, to be placed at the level of the rear foot pegs’ brackets. Specific model for the following KAWASAKI :    ZX6 R 2009 - 2012 These straps fastenings can also be adapted on other motorcycles’ models, as long as the distance between the rear footpegs’ brackets fastenings measures 95 mm.     Sold by pair, can be...

    49,00 € In Stock
    Add to cart
    In Stock

  • Pair of clip on handlebars (right AND left clip ons) designed for 51mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees

    49,00 € Out of stock
    Out of stock

  • Polycarbonate Windscreen, double curvature, specific for the following KAWASAKI models : ZX10-R from 2008 to 2010 ZX6-R from 2009 to 2012 ZX-6R 636 from 2013 to 2018 ZX6R 636 from 2019 to 2020

    39,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket front fairing bracket, built in plastic based on the OEM model, specific for KAWASAKI :  ZX6-R from 2009 to 2012

    69,00 € In Stock
    Add to cart
    In Stock

  • Short aluminum license plate holder specific to YAMAHA : YZF-R6 from 2006 to 2016

    28,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • LED Taillight with integrated turn signals , specific model for Kawasaki Z 750 from 2007 to 2012, Z1000 from 2007 to 2009, ZX6R from 2009 to 2012, and ZX10R from 2008 to 2010.

    44,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock

  • Pair of universal aluminum rearview mirrors block off plates for many KAWASAKI NINJA models. Measurements : 6,1 x 2,1 cm

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener   Available in the following dimensions: 14mm, 17mm   Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units

    3,00 € In Stock
    In Stock

  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock

  • Complete fairings hardware kit, specific for the following KAWASAKI :     ZX-10R 2008 - 2010Also compatible with ZX6R 2009 - 2012

    44,00 € Out of stock
    Add to cart
    Out of stock

  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock

  • Universal aluminium license plate holder, adjustable and foldable.

    29,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Complete kit of rear-sets, specific for the following KAWASAKI : ZX6-R 2009 - 2012  ZX6R 636 2013 - 2018 ZX6R 636 2019-2020 The rear brake switch (maintaining the lighting of the tail light when braking) is supplied with the kit.

    199,00 € In Stock
    Add to cart
    In Stock

  • Pair of front footrests, aftermarket model based on the OEM, specific for the following for many KAWASAKI (see compatibility list below). Caution : these foot-pegs will perfectly, but in some case the provided hardware may not be a perfect match (depending on the motorcycle model). If so simply re-use the hardware from your past footpegs on ours. Sold by...

    24,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Out of stock
    Add to cart
    Out of stock

  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € In Stock
    In Stock

  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock

  • USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    14,00 € In Stock
    Add to cart
    In Stock

  • Rear footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following KAWASAKI models: ZX6-R from 2009 to 2012 ZX-6R 636 from 2013 to 2016 ZX10-R from 2008 to 2010 Sold by pairs, including left foot-peg and right foot peg.

    49,00 € In Stock
    In Stock

  • Pair of frame sliders (or crash pads) specific to the following KAWASAKI : ZX6-R from 2009 to 2016 Caution : you will need to drill your OEM fairings to install these sliders ! 

    49,00 € In Stock
    Add to cart
    In Stock

  • Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific for the following KAWASAKI models. Caution : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware from your past footpegs on ours, and you'll be good to go ! Sold by pairs, right foot peg and left...

    24,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock

  • Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following KAWASAKI :  ZX6-R from 2009 to 2012 ZX-6R 636  2013 to 2016

    79,00 € In Stock
    In Stock

  • Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...

    9,00 € In Stock
    In Stock

  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock

  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. . Sold by pair only.

    6,00 € In Stock
    Add to cart
    In Stock

  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock

  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock

  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock

  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M10 fastening thread, for example :  Numerous Kawasaki models

    19,00 € In Stock
    In Stock

  • Seat cowl in Injection ABS, brand new and specific for the following KAWASAKI: ZX6-R from 2009 to 2012, ZX-6R 636 from 2013 to 2018. + 10€ extra for color models (other than black and white). Please check pictures to control the exact color you will receive. We do not guarantee that the color shade will bethe same as OEM. 

    69,00 € In Stock
    In Stock

  • Rear passenger seat pillion, brand new model, adaptable on the following KAWASAKI models : ZX6-R from 2009 to 2018.

    59,00 € In Stock
    Add to cart
    In Stock

  • CNC aluminum license plate holder, specific to the following KAWASAKI : ZX-6R from 2009 to 2012 ZX6-R 636 NINJA from 2013 to 2018 ZX10-R from 2008 to 2010 Reflector and turn signals’ brackets included. These parts can easily be removed if you don’t need them.

    54,00 € In Stock
    Add to cart
    In Stock

  • Quick release (1/4 turn) gas cap in anodised aluminum, specific for many KAWASAKI models produced since 2006. Sold with a spare seal and the necessary hardware.

    44,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below

    9,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € Product available with different options
    Product available with different options

  • Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous KAWASAKI models. Available in different colors, hardware included.

    59,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € Out of stock
    Add to cart
    Out of stock

  • Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following KAWASAKI models : ZX6-R from 2009 to 2012 ZX-6R 636 from 2013 to 2020 Sold by pairs, including right and left foot pegs.

    69,00 € In Stock
    In Stock

  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock

  • Front pilot seat, brand new model, adaptable on the following KAWASAKI models : ZX-6R 600 from 2009 to 2012. ZX6-R 636 from 2013 to 2018.

    69,00 € In Stock
    Add to cart
    In Stock

  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of adhesive tank traction pads, to be installed on the flanks of the tank. Specific modelfor KAWASAKI : ZX6-R 2009 - 2012 ZX-6R 636 2013 - 2018 ZX6R 2019-2020 Sold by pair.

    24,00 € In Stock
    In Stock

  • Pair of aftermarket rearview mirrors, same form and fitment as the OEM one, specific to the following KAWASAKI models : ZX6-R from 2009 to 2012 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.

    34,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket gear shift lever or pedal, same form and fitment as the OEM one, specific to the following KAWASAKI : ZX6-R 2005 - 2018 ZX10-R 2006 - 2010

    29,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of Brown rubber grips , Cafe-Racer Design, universal for all motorcycles equipped with a 22mm external diameter handlebar. Sold by pair. Different colors / styles available ( Light Brown , Dark Brown ) 

    12,00 € In Stock
    In Stock

  • Pair of Black rubber grips , Cafe-Racer Design , universal for all motorcycles equipped with a 22mm diameter handlebar. Sold by pair. Different colors / styles available.

    12,00 € In Stock
    In Stock

  • Pair of front footpegs (for the pilot) in CNC 6061 machined and anodised aluminum, available in different colors. Specific model for numerous KAWASAKI motorcycles, compatibility list available below.

    32,00 € In Stock
    In Stock

  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with NINJA logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € Product available with different options
    Product available with different options

  • Kit of adhesive tapes for the inner rim (front and rear). Model with ZX6R logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with ZXR logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Adhesive tank pad protection, design ZX6R Different colors available – You choose !

    14,00 € Out of stock
    Add to cart
    Out of stock

  • Stainless steel radiator guard, specific for the following KAWASAKI: ZX6-R 2009 - 2012 ZX-6R 636 2013 - 2017

    49,00 € In Stock
    Add to cart
    In Stock

  • Steering damper + fastening bracket set, specific for Kawasaki : ZX6-R 600 2009 - 2012 ZX-6R 636 2013 - 2017 Sold as displayed on pictures, with the mounting bracket always in black. Possibility to choose the hydraulic cylinder, in black or silver color.     

    149,00 € In Stock
    In Stock

  • Decorative sticker with NINJA logo.

    5,00 € In Stock
    Add to cart
    In Stock

  • Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available (S, M and L) and 2 types of fastenings (handlebar or screw).   Sold in kit: phone cover and fixing system.

    17,00 € In Stock
    In Stock

  • A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.

    4,00 € Product available with different options
    Product available with different options

  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € In Stock
    In Stock

  • Decorative anodised screw with colored offset.

    2,50 € Product available with different options
    Product available with different options

  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock

  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € In Stock
    In Stock

  • Complete fairings hardware kit, specific for the following KAWASAKI :   ZX6R / ZX6RR 2009 - 2012

    44,00 € In Stock
    Add to cart
    In Stock
  • New

    Aftermarket cover for original speedometer, brand new and specific for the following KAWASAKI models :    ZX-6R 2009 - 2012 ZX6 R 636 2013 - 2018    Sold as displayed on pictures.

    54,00 € In Stock
    Add to cart
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € In Stock
    In Stock

  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock

  • 12V , 35W xenon lighting kit, specific for many KAWASAKI models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in...

    29,00 € In Stock
    In Stock

  • LED Lighting Kit specific for many KAWASAKI. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses and will depend on the...

    78,00 € In Stock
    In Stock
  • New

    Side kickstand foot enlarger, in anodized aluminum, specific for the following KAWASAKI :   ZX6R 2009 - 2020 ZX10R 2004 - 2005 ZX10R 2016 - 2020 ER6 ER6N ER6F 650 2006 - 2015 NINJA 400 650 2006 - 2015 Z800 / Z800E 2013 - 2016 Z1000 / Z1000R 2017 - 2020 Z1000SX 2017 - 2019 NINJA 1000SX 2020 VERSYS-X 300 2017 - 2020 VERSYS 650 2006 - 2009

    14,00 € In Stock
    In Stock
Showing 1 - 164 of 164 items
A problem ? A question ?
We have a dedicated team speaking your language at +33 5 34 43 48 16
Our site uses cookies to improve your navigation. For more information, click here. To accept these conditions and close this message it is by this :
Copyright © AVDB MOTO 2019