> >>>CBR 600 RR 2009-2012

Catalog

Availability
CBR 600 RR 2009-2012

CBR 600 RR 2009-2012 

  • Steering stem nut for many HONDA models. You will find the motorcycles compatibility list below.    Technical informations : Nut : M24x1 Necessary tools for installation : 31 wrench key Depth of the threaded part : 11 mm Maximum depth of the nut : 14 mm Tightening Torque : 90Nm

    19,00 € In Stock
    In Stock

  • M51x4 Front Brake fluid reservoir cap for many HONDA models.   You will find the motorcycles compatibility list below.

    15,00 € Product available with different options
    Product available with different options

  • M20x2.5 oil filler cap for many HONDA models. You will find the motorcycles compatibility list below.

    15,00 € Product available with different options
    Product available with different options

  • Rear-view mirrors block-off plates for many HONDA models. You will find the motorcycles compatibility list below.   Distance between the fastening points : 40mm   Sold by pair.

    24,00 € In Stock
    In Stock

  • Rear foot-pegs for many HONDA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock

  • Front foot-pegs for many HONDA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock
  • New

    Front foot-pegs for many HONDA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    44,00 € Out of stock
    Out of stock

  • LED Taillight with integrated turn signals, specific model for Honda CBR600RR from 2007 to 2012.   Taillight with integrated turn signals, Under-seat model ! Need some arrangement for the fitment.  

    64,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Turn signals spacers adapters in plastic, specific for many HONDA, some TRIUMPH, KAWASAKI. These adapters can also adapt on other models. 1 set of 4 spacers adapters is necessary for 1 pair of turn signals (2 adapters per turn indicator)

    2,00 € In Stock
    Add to cart
    In Stock

  • Short brake lever specific to many HONDA CBR 600 and 1000 RR, from 2004 to 2018. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the...

    27,00 € In Stock
    In Stock

  • Long brake lever specific to many HONDA sportsbikes' models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...

    37,00 € In Stock
    In Stock

  • Short clutch lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the...

    27,00 € In Stock
    In Stock

  • Long clutch lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many HONDA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...

    37,00 € In Stock
    In Stock

  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock

  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • License plate light (3 LED).

    9,00 € In Stock
    Add to cart
    In Stock

  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € Product available with different options
    Product available with different options

  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 48mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € Product available with different options
    Product available with different options

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

    9,00 € Product available with different options
    Product available with different options

  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock

  • Full fairing kit, unused, Injected ABS quality, specific for the following HONDA models :    CBR 600RR from 2009 to 2012    The first picture shows the color of the fairing kit you will receive (different colors available). Free delivery with this fairing kit, sent with a tracking number, insurance and sign-upon receipt

    610,00 € In Stock
    In Stock

  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. Model to be installed as a bar end caps, fits all handlebars with an 18mm internal diameter or with an 8mm internal thread. All the universal turn signals models we propose are visible on the last photo!

    24,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Quick release (1/4 turn) gas cap in anodised aluminum, specific for HONDA (complete compatibility list available below).   CAUTION ! Not compatible with Honda's new gas hatches, including CBR 1000 RR SP, CBR 650 2017 (...), A doubt? Your gas cap must be as shown in photo 1. Sold with  a spare seal and the necessary hardware.

    44,00 € In Stock
    In Stock

  • Engine cover protection set in hard plastic and nylon fiber, specific to the following HONDA models : CBR 600RR from 2007 to 2016 Preferential price for the complete kit, including engine sliders for : Alternator (left side), Clutch (right side) and Starter (right side). Each of these protections is also available per unit.

    119,00 € In Stock
    In Stock

  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock

  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White

    7,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description) Sold by pairs. Resistors included for free with the...

    29,00 € In Stock
    In Stock

  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Pair of AVDB rearsets specific for the following HONDA models :   CBR 600 RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR600RR 2013 - 2017   Sold by pair only (right and left rearset).

    149,00 € Out of stock
    Out of stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.

    19,00 € In Stock
    Add to cart
    In Stock

  • Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 48mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    79,00 € In Stock
    In Stock

  • Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 48mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    109,00 € Product available with different options
    Product available with different options

  • 2 function universal LED turn signals with position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Front wheel rim sold per unit , in 6061 T6 aluminum, specific for the following HONDA :     CBR 600RR 2007 - 2008 CBR 600RR 2009 - 2012 Suitable for CBR 600-RR 2013 - 2016 but with a different design   Price also includes delivery through registered and delivered upon signature parcel. The text below should answer most of your question, if you still have...

    329,00 € In Stock
    In Stock
  • New

    "AVDB by Jealou’S" Water radiator guard, specific for the OEM radiators of the following HONDA models :    CBR 600 RR 2007 - 2012 CBR 600RR 2013 - 2017

    59,00 € In Stock
    Add to cart
    In Stock

  • YOSHIMURA USA RS5 STAINLESS STEEL / CARBON slip on exhaust for HONDA : CBR 600 RR from 2007 to 2016 Displayed price includes signed for upon receipt delivery (tracked parcel).

    590,00 € Out of stock
    Add to cart
    Out of stock

  • TWO BROTHERS slip on exhaust in titanium with magnesium tip, specific for HONDA :    CBR 600 RR 2007 - 2008 CBR-600 RR 2009 - 2012 CBR 600 RR 2013 - 2017 Displayed price includes signed for upon receipt delivery (tracked parcel).

    490,00 € In Stock
    Add to cart
    In Stock

  • ARROW slip on exhaust for HONDA :     CBR 600 RR 2007 - 2017   Displayed price includes signed for upon receipt delivery (tracked parcel).

    540,00 € In Stock
    Add to cart
    In Stock

  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € Product available with different options
    Product available with different options

  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock

  • Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.

    4,00 € In Stock
    In Stock

  • Rear solid wave shape brake disc, model in 220 mm external diameter, specific and adaptable to many HONDA.  Wave shape. List of compatibilities per motorcycle models are available below for further information.    MEASUREMENTS: External diameter : 220 mm Internal diameter : 105 mm Thickness : 5 mm Mounting holes : 4 Mounting holes' diameter : 10,4 mm...

    60,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock

  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € In Stock
    In Stock

  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € Out of stock
    Out of stock

  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € In Stock
    In Stock

  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € Product available with different options
    Product available with different options

  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock

  • M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    5,00 € In Stock
    In Stock

  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock

  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M8 fastening thread Honda, Kawasaki, Triumph, Suzuki, Ducati ... If you need a model with an offset for the bobbins' fastening to your swing arm, you will need the reference DIAANO8 model.

    9,00 € In Stock
    In Stock

  • Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many HONDA models (list of compatibilities below). Sold by pairs, different colors available. Measures : 6,0 x 2,8 cm at the largest point Distance between each fastening point : 4 cm

    19,00 € Product available with different options
    Product available with different options

  • Front or rear brake fluid reservoir cap in CNC 6061 anodised aluminum, round model with integrated thread (screw model), specific for numerous HONDA models, such as CBR 600RR 2007 - 2016, 1000RR 2004 - 2018? CB1000R etc...   Measures :  Outer diameter : 58mm Inner diameter : 50mm

    14,00 € Product available with different options
    Product available with different options

  • Pair of front wave brake discs, model in 310 mm external diameter, specific and adaptable to many HONDA. List of compatibilities per motorcycle models are available below.   MEASUREMENTS: External diameter : 310 mm Internal diameter : 94 mm Thickness : 5 mm Mounting holes : 6 Mounting holes' diameter : 6,2 mm Distance between opposite mounting holes :...

    200,00 € Out of stock
    Add to cart
    Out of stock

  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € Product available with different options
    Product available with different options

  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock

  • 9,00 € In Stock
    In Stock

  • Racing rear fender, in Injection ABS plastic, specific for the following HONDA models : CBR 600 RR from 2007 to 2016

    49,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length : 120 mm Depth : Hollow (empty) Diameter: 32 mm   Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock

  • FProtection pads set including : one slider for front fork and one slider for swingarm, specific to the following HONDA models : CBR 600 RR 2007- 2016

    49,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket stator cover (left side when you are on the bike), specific to the following HONDA : CBR 600 RR 2007 - 2017 Hornet 600  2007 - 2012 CBF 600      2008 - 2013 This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this crankcase cover.    

    59,00 € Out of stock
    Add to cart
    Out of stock

  • Adhesive tank pad protection, design CBR 1000 RR / CBR FIREBLADE. Different colors available – You choose !

    14,00 € Product available with different options
    Product available with different options

  • Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models : CBR 600 RR 2007 - 2008 CBR 600 RR 2009 - 2012

    109,00 € In Stock
    In Stock

  • Tail fairing, injected ABS quality, specific for the following models : CBR 600 RR 2007 - 2008 CBR 600 RR 2009 - 2012

    99,00 € In Stock
    In Stock

  • Rim edge stickers set for motorcycle rims. Kit of 4 stickers.  

    8,00 € In Stock
    Add to cart
    In Stock

  • Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following HONDA :   CBR 600RR 2007 - 2012 CBR 600RR 2013 - 2017 Note : pictures accurately display the kit, as you will receive it. Only the shaft rod can, in some case, slightly change depending on the motorcycle model.

    49,00 € Out of stock
    Add to cart
    Out of stock

  • 12V , 35W xenon lighting kit, specific for many HONDA models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses...

    29,00 € In Stock
    In Stock

  • LED Lighting Kit specific for many HONDA. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses and will depend on the OPTION...

    78,00 € In Stock
    In Stock

  • Pair of aluminum brackets for straps fastening, to be placed at the level of the rear foot pegs’ brackets. Specific model for the following HONDA :    CBR 600RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR600 RR 2013 - 2017 These straps fastenings can also be adapted on other motorcycles’ models, as long as the distance between the rear footpegs’ brackets...

    39,00 € In Stock
    Add to cart
    In Stock

  • M8 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 6 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock

  • M10 Screw covers in anodized aluminium, available in different colours. For flat screw heads, fastened with an Allen key.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock

  • Clutch cable, specific for HONDA :   CBR 600RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR 600 RR 2013 - 2017    Sold per unit.   

    19,00 € Product available with different options
    Product available with different options

  • Throttle pull and/or push cable specific for HONDA :   CBR 600RR 2007 - 2012 CBR 600-RR 2013 - 2017     Sold per unit, or as a complete kit with both (push and pull cables).   

    29,00 € In Stock
    In Stock
  • New

    Wheel rim tape with CBR600RR logo.   Racing model, pre-cut in 1/5. 20 parts, designed to equip a complete motorcycle. 5 parts per rim side (front + rear). Ready to apply on 17” clean rims.   Width : about 1 cm.

    14,00 € In Stock
    In Stock
  • New

    Wheel rim tape with CBR logo.   Racing model, pre-cut in 1/5. 20 parts, designed to equip a complete motorcycle. 5 parts per rim side (front + rear). Ready to apply on 17” clean rims.   Width : about 1 cm.

    14,00 € In Stock
    In Stock

  • Pair of clip on handlebars (right AND left clip ons) designed for 48mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees

    49,00 € In Stock
    In Stock

  • Black Polycarbonate Windscreen, double curvature, specific for HONDA :   CBR 600 RR 2007 - 2012

    39,00 € In Stock
    In Stock

  • Pair of flush-mount indicators (left AND right) for HONDA from CBR 600RR 2003 to 2014 and 1000RR from 2004 to 2007 Double-sided tape model, for a direct integration in place of your original turn signals.

    19,00 € In Stock
    In Stock

  • Pair of flush-mount indicators (left AND right) for HONDA CBR 600RR 2003 - 2016 and 1000RR 2004 - 2007 Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn signals. Will also fit on other HONDA models, produced between 1999 and 2015.  These turn signals are E-mark.

    14,00 € In Stock
    In Stock

  • Aftermarket front headlight assembly , brand new product, specific to the following HONDA models : CBR 600RR from 2007 to 2012. This headlight is available as a complete set or separately : left side and/or right side headlight

    139,00 € Product available with different options
    Product available with different options

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow (empty) Diameter: 34,5 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • LED Taillight with integrated turn signals, specific model for Honda Cbr 600RR from 2007 to 2012 Original Type. Crosstourer 1200 all.

    39,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock

  • Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm

    9,00 € In Stock
    In Stock

  • Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener   Available in the following dimensions: 14mm, 17mm   Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units

    3,00 € Product available with different options
    Product available with different options

  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € Out of stock
    Out of stock

  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock

  • Complete fairings fastening hardware set, specific for Honda :   CBR 600RR 2007 - 2012

    44,00 € In Stock
    Add to cart
    In Stock

  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock

  • RACING gas cap in aluminum suitable for many HONDA models.

    39,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of swing arm spools with a laser logo, adaptable on all the HONDA CBR RR and BMW S1000RR.

    15,00 € Out of stock
    Out of stock

  • Oil filler cap in aluminium, with laser-engraved logo, adaptable on many HONDA CBR RR.

    10,00 € Out of stock
    Out of stock

  • Complete kit of rear-sets, specific for the following HONDA: CBR 600 RR from 2007 to 2016. The rear brake switch (maintaining the lighting of the tail light when braking) is supplied with the kit.

    199,00 € In Stock
    Add to cart
    In Stock

  • Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version. These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8). Sold by pair (left AND right mirror).

    34,00 € In Stock
    In Stock

  • Aftermarket front fairing bracket, built in plastic based on the OEM model, specific for the following HONDA : CBR600RR from 2007 to 2012

    49,00 € In Stock
    Add to cart
    In Stock

  • Pair of aftermarket rear view mirrors, built based on the OEM models, specific for the following HONDA models : CBR 600 RR from 2003 to 2016 CBR 1000 RR from 2004 to 2007 CBR 600 F from 2011 to 2014 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.

    28,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € Product available with different options
    Product available with different options

  • Pair of front footrests, aftermarket model based on the OEM, specific for the following HONDA models : CBR 600 RR from 2007 to 2017 CBR 1000 RR from 2008 to 2020 CB1000R from 2008 to 2020 CAUTION : you will need to re-use your OEM axles to install these footpegs, the one provided with this kit will not fit your OEM footrest brackets. Sold by pairs, right...

    24,00 € In Stock
    Add to cart
    In Stock

  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock

  • Aftermarket gear shift lever or pedal, specific for the following HONDA models :   CBR 600 RR 2003 - 2017 CBR 1000 RR 2004 - 2016

    29,00 € In Stock
    Add to cart
    In Stock

  • Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following HONDA models : CBR 600 RR from 2007 to 2017 Sold by pairs, including right and left foot pegs.

    69,00 € In Stock
    In Stock

  • Rear footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following HONDA models: CBR 600 RR from 2007 to 2017 Sold by pairs, including left foot-peg and right foot peg.

    49,00 € In Stock
    In Stock

  • Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific for many  HONDA CBR 600 RR and CBR 1000 RR. If the fastening system is not provided or if the one you received is not perfectly adaptable to your motorbike, you just need to recover the ones from your old footpegs to assemble these new ones ! Sold by pairs, right foot peg and...

    24,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € Out of stock
    Add to cart
    Out of stock

  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock

  • Short aluminum license plate holder specific to HONDA : CBR 600 RR from 2007 to 2017

    54,00 € In Stock
    Add to cart
    In Stock

  • Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following HONDA : CBR 600 RR from 2007 to 2008 (no modification needed when installing these protections) CBR 600RR from 2009 to 2012 (caution : for installation on these models, you will need to drill your fairings)

    64,00 € In Stock
    In Stock

  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock

  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. Sold by pair only.

    6,00 € Out of stock
    Add to cart
    Out of stock

  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock

  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock

  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock

  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M8 fastening thread, for example :  Honda, Kawasaki, Triumph, Suzuki, Ducati ...

    19,00 € Out of stock
    Out of stock

  • Seat cowl in Injection ABS, brand new and specific for the following BMW  : CBR 600 RR from 2007 to 2016. + 10€ extra for color models (other than black and white). Please check pictures to control the exact color you will receive. We do not guarantee that the color shade will bethe same as OEM.

    59,00 € In Stock
    In Stock

  • Rear passenger seat pillion, brand new model, adaptable on the following HONDA models : CBR 600 RR from 2007 to 2012.

    59,00 € In Stock
    Add to cart
    In Stock

  • Ram air intake in injection ABS, specific to the following HONDA models : CBR 600 RR from 2007 to 2012.

    15,00 € In Stock
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth: 117 mm Diameter: 31 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below

    9,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock

  • Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous HONDA models. Available in different colors, hardware included. CAUTION : if you plan on mounting it on a 1100XX or 1000RR 2012 + you will need some spacers to rise the hand grip. Without these spacers, your passenger may not have enough space to slip his or her...

    59,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock

  • Front pilot seat, brand new model, adaptable on the following HONDA models : CBR 600 RR from 2007 to 2016.

    69,00 € Out of stock
    Add to cart
    Out of stock

  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of adhesive tank traction pads, to be installed on the flanks of the tank. Specific model for HONDA :  CBR600RR 2007-2012   These protections are proposed in two different qualities and colors, for a discreet look while offering a cool design to your moto.

    19,00 € In Stock
    In Stock

  • Aftermarket rear brake pedal, specific for the following HONDA models : CBR600RR from 2003 to 2006

    29,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Position light with LED bulb, specific to the following HONDA :   CBR 600 RR from 2007 to 2012

    24,00 € In Stock
    Add to cart
    In Stock

  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with CBR logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.  

    19,00 € Out of stock
    Out of stock

  • Stainless steel radiator guard, specific for the following HONDA :    CBR 600 RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR 600RR 2013 - 2017     

    49,00 € In Stock
    Add to cart
    In Stock

  • Steering damper + fastening bracket set, specific for HONDA: CBR 600 RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR600 RR 2013 - 2017 Sold as displayed on pictures, with the mounting bracket always in black. Possibility to choose the hydraulic cylinder, in black or silver color.    

    149,00 € In Stock
    In Stock

  • Decorative sticker with CBR logo.

    4,00 € Out of stock
    Add to cart
    Out of stock

  • A M10 decorative screw that will give you energy even on a Monday morning ! Right side thread (standard). Sold by pair.

    4,00 € In Stock
    In Stock

  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € Out of stock
    Out of stock

  • Decorative anodised screw with colored offset.

    2,50 € In Stock
    In Stock

  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock

  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € In Stock
    In Stock

  • HONDA Keyrings - different models and designs available.

    2,00 € In Stock
    In Stock

  • Aftermarket cover for original speedometer, brand new and specific for the following HONDA models :    CBR 600RR 2007 - 2012CBR 600-RR 2013 - 2017    Sold as displayed on pictures.

    34,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket brand new speedometer, similar to OEM, specific for the following HONDA models :   CBR 600RR 2007 - 2008 CBR 600-RR 2009 - 2012   Adaptable on CBR 600 RR 2013 - 2017 without modification, but the 'design' is different. Note : The retro lighting on this model is orange.

    199,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket regulator rectifier, specific for HONDA, APRILIA, PIAGGIO (complete compatibility list available below).   Brand new product, sold as displayed on pictures, ready to plug in (plug-and-play system). Hardware not included.   IMPORTANT : In order to avoid any mistake upon order, make sure to compare the pictures and/or measures on the description...

    89,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Waste tube, cables or pipes bracket in anodised aluminum, universal model adaptable to many motorcycle and scooter models. Sold per unit, various colours available.

    9,00 € In Stock
    In Stock

  • Radiator, original type model, specific for following HONDA :     CBR 600 RR 2007 - 2008 CBR 600-RR 2009 - 2012 CBR 600RR 2013 - 2017      Preferential rate for the option WITH COVER PROTECTION.

    149,00 € In Stock
    In Stock

  • Easy-pull clutch system in anodised aluminum. To be installed between the clutch lever and cable to reduce the effort to pull your clutch lever in.   Installs on all motorcycles with cable clutch system.

    29,00 € In Stock
    In Stock
  • New

    Decorative sticker with RACING logo.   Dimension : 9x1.2 cm    Sold by pair. Various colours available.

    4,00 € In Stock
    In Stock
  • New

    Decorative sticker with CBR logo.

    4,00 € In Stock
    In Stock
  • New

    Decorative sticker with CBR600RR logo.

    4,00 € In Stock
    In Stock
  • New

    Exhaust Connection tube / Mid Pipe link specific for HONDA : CBR 600RR 2007 - 2013   SPECIFICATIONS: Compatibility : OEM exhaust line Weight : 940 gr Output diameter : 51 mm    HOMOLOGATION : In theory, the homologation will depend mostly on the exhaust you will fit at the end of the tube. As the sleeve is only an intermediate connecting element, if the...

    109,00 € In Stock
    Add to cart
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock
Showing 1 - 181 of 181 items
A problem ? A question ?
We have a dedicated team speaking your language at +33 5 34 43 48 16
Our site uses cookies to improve your navigation. For more information, click here. To accept these conditions and close this message it is by this :
Copyright © AVDB MOTO 2019