> >>>CBR 600 F 1999-2000

Catalog

Availability
CBR 600 F 1999-2000

CBR 600 F 1999-2000 

  • Steering stem nut for many HONDA models. You will find the motorcycles compatibility list below.    Technical informations : Nut : M24x1 Necessary tools for installation : 31 wrench key Depth of the threaded part : 11 mm Maximum depth of the nut : 14 mm Tightening Torque : 300 Nm

    19,00 € In Stock
    In Stock

  • M51x4 Rear Brake fluid reservoir cap for many HONDA models. You will find the motorcycles compatibility list below.

    15,00 € In Stock
    In Stock

  • M20x2.5 oil filler cap for many HONDA models. You will find the motorcycles compatibility list below.

    15,00 € In Stock
    In Stock

  • Front Brake fluid reservoir cap for many HONDA models and some MASH. You will find the motorcycles compatibility list below.

    19,00 € In Stock
    In Stock

  • Rear-view mirrors block-off plates for many HONDA models. You will find the motorcycles compatibility list below.   Distance between the fastening points : 40mm   Sold by pair.

    24,00 € In Stock
    In Stock

  • Rear foot-pegs for many HONDA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock

  • Front foot-pegs for many HONDA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Turn signals spacers adapters in plastic, specific for many HONDA, some TRIUMPH, KAWASAKI. These adapters can also adapt on other models. 1 set of 4 spacers adapters is necessary for 1 pair of turn signals (2 adapters per turn indicator)

    2,00 € In Stock
    Add to cart
    In Stock

  • Short brake lever specific to many HONDA , YAMAHA, KAWASAKI, BENELLI, KYMCO and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below If you want a color combination we don’t suggest (between main part of the lever and the 6 positions dial), you can specify you choice within the 8 available colors in the comment...

    27,00 € In Stock
    In Stock

  • Long brake lever specific to many HONDA, KAWASAKI, YAMAHA, BENELLI, KYMCO and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comments’...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (Flip-Up) brake lever specific to many HONDA, KAWASAKI, YAMAHA, BENELLI, KYMCO and KEEWAY models. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock

  • Short clutch lever specific to many HONDA, BENELLI and KEEWAY models.  The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment...

    27,00 € In Stock
    In Stock

  • Long clutch lever specific to many HONDA, BENELLI and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (Flip-Up) clutch lever specific to many HONDA, BENELLI and KEEWAY models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock

  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock

  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • License plate light (3 LED).

    9,00 € In Stock
    Add to cart
    In Stock

  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In Stock
    In Stock

  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 43mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

    9,00 € In Stock
    In Stock

  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock

  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Full fairing kit, unused, Injected ABS quality, specific for the following models : HONDA CBR 600 F4 from 1999 to 2000.

    550,00 € In Stock
    In Stock

  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock

  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € In Stock
    Add to cart
    In Stock

  • Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White

    7,00 € Product available with different options
    Product available with different options

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description)

    29,00 € In Stock
    In Stock

  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 43mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    79,00 € In Stock
    In Stock

  • Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 43mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    109,00 € In Stock
    In Stock
  • New

    2 function universal LED turn signals with position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € Product available with different options
    Product available with different options

  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock

  • Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.

    4,00 € In Stock
    In Stock

  • Full pack containing : - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

    35,00 € In Stock
    Add to cart
    In Stock

  • Rear solid brake disc, model in 220 mm external diameter, specific and adaptable to many HONDA and TRIUMPH. Measurements and list of compatibilities per motorcycle models are available below for further information.

    60,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock

  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € Product available with different options
    Product available with different options

  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In Stock
    In Stock

  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € In Stock
    In Stock

  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € In Stock
    In Stock

  • Pair of front brake discs, 296 mm external diameter, specific and adaptable to many HONDA models. Measurements and list of compatibilities per motorcycle models are available below for further information. Sold by PAIR.

    200,00 € In Stock
    Add to cart
    In Stock

  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock

  • Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm,  for screws installed with a 8 Allen Key

    0,55 € In Stock
    In Stock

  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock

  • Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many HONDA models (list of compatibilities below). Sold by pairs, different colors available. Measures : 6,0 x 2,8 cm at the largest point Distance between each fastening point : 4 cm

    19,00 € Product available with different options
    Product available with different options

  • Brake and / or clutch fluid reservoir cap, depending on models. CNC 6061 anodised aluminum cover, rectangular, adaptable on many HONDA models (see list below). Measures (at the widest) : 84 x 42 mm Distance between the opposite fastening holes : 70 mm

    14,00 € In Stock
    In Stock

  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € In Stock
    In Stock

  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock

  • 9,00 € In Stock
    In Stock

  • OEM gas cap adhesive protection, specific for the following HONDA.

    14,00 € Product available with different options
    Product available with different options

  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock

  • Aftermarket stator cover (left side when you are on the bike), specific to the following HONDA : CBR-600 F4 1999 - 2000 CBR 600F FI 2001 - 2006 CBR 600FS  F Sport / CBR F4i  2001 - 2002 This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this crankcase...

    59,00 € In Stock
    Add to cart
    In Stock

  • Tail fairing, injected ABS quality, specific for the following models : CBR 600F4 / 600FX 1999-2006 CBR 600F / 600FI 2001-2006

    99,00 € In Stock
    In Stock

  • Rim edge stickers set for motorcycle rims. Kit of 4 stickers.  

    8,00 € In Stock
    Add to cart
    In Stock

  • Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following HONDA :   CBR 600 F F4 1999 - 2000 CBR 600 F FS 2001 - 2002 CBR 600 F FI 2001 - 2006 Note : pictures accurately display the kit, as you will receive it. Only the shaft rod can, in some case, slightly change depending on the motorcycle model.

    49,00 € In Stock
    Add to cart
    In Stock

  • Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models :   CBR 600-F4 1999 - 2000

    119,00 € In Stock
    In Stock

  • Pair of clip on handlebars (right AND left clip ons) designed for 43mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees

    49,00 € In Stock
    In Stock

  • Black Polycarbonate Windscreen, double curvature, specific for HONDA CBR 600 F4 from 1999 to 2000.

    39,00 € In Stock
    Add to cart
    In Stock

  • Pair of flush-mount indicators (left AND right) for HONDA CBR 600 F4 1999-2000, FS from 2001 to 2002, and F from 2002 to 2005 Double-sided tape model, for a direct integration in place of your original turn signals.

    19,00 € In Stock
    In Stock

  • Pair of flush-mount indicators (left AND right) for HONDA CBR 600RR 2003 - 2016 and 1000RR 2004 - 2007 Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn signals. These turn signals are E-mark.

    14,00 € In Stock
    In Stock

  • Standard 12V,35W (best quality for a ballast) xenon light kit, composed of a bi-xenon H4 bulb, a slim ballast in alternating current, an extension cord and a LED position day light. Lighting color: 6000K (slightly blue white color light)  Slim rapid ballast measures: 83,3 x 61,2mm Transformer unit measures: 56,6 x 31,1mm   If you plan on installing it on...

    34,00 € In Stock
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • LED Taillight with integrated turn signals , specific model for Honda Cbr 600 F4 FX from 1999 to 2006 and F FI from 2001 to 2006.

    39,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock

  • Universal aluminum exhaust muffler bracket. Caution : this model will not fit on exhaust systems without adjustable muffler clamps

    19,00 € Out of stock
    Out of stock

  • Pair of universal aluminum rearview mirrors block off plates for many HONDA and BMW models : RR and S1000 RR models. Measurements : 6,1 x 2,1 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm

    9,00 € In Stock
    In Stock

  • Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener   Available in the following dimensions: 14mm, 17mm   Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units

    3,00 € In Stock
    In Stock

  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € In Stock
    In Stock

  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock

  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € Product available with different options
    Product available with different options

  • Universal aluminium license plate holder, adjustable and foldable.

    29,00 € In Stock
    Add to cart
    In Stock

  • RACING gas cap in aluminum suitable for many HONDA models.

    39,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Oil filler cap in aluminium, with laser-engraved logo, adaptable on many HONDA CBR RR.

    10,00 € In Stock
    In Stock

  • Brake and / or clutch fluid reservoir cap for HONDA CBR. For 1100XX this cap will fit on the brake and clutch reservoirs, simply make sure to order 2 units.

    10,00 € In Stock
    In Stock

  • Pair of front footrests, aftermarket model based on the OEM, specific  to many HONDA. Sold by pairs, right foot peg and left foot-peg.

    24,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    Add to cart
    In Stock

  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € In Stock
    In Stock

  • Pair of aftermarket rearview mirrors, same form and fitment as the OEM one, specific to the following HONDA : VTR SP1 from 1999 and 2000 CBR 600 FS from 2001 and 2002 CBR600 F4 and CBR 600 FI from 1999 to 2006 CBR 900 RR 919 from 1998 and 1999 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.

    28,00 € In Stock
    In Stock

  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock

  • USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    14,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket front headlight assembly , brand new product, specific to the following HONDA models : CBR600 F4 1999 - 2000

    179,00 € In Stock
    In Stock

  • Aftermarket gear shift lever or pedal, specific for the following HONDA models : CBR 600 F F4 FI from 1999 to 2006 CBR 600 FS from 2001 to 2002 (CAUTION, the current model is in silver color)

    29,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock

  • Adhesive protection for the upper triple tree clamp, specific model for the following Honda CBR 600 F, F4 from 1999 to 2006 CBR 600 FS from 2001 to 2002 CBR 1100 XX  from1997 to 2007 Color: Carbon   

    9,00 € In Stock
    Add to cart
    In Stock

  • Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...

    9,00 € In Stock
    In Stock

  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock

  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. . Sold by pair only.

    6,00 € In Stock
    Add to cart
    In Stock

  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock

  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock

  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock

  • Complete kit of rear-sets, specific for the following HONDA : CBR600 F4 1999 - 2000 CBR 600 FI 2001 - 2005 CBR-600 FS 2001 - 2002 The rear brake switch (maintaining the lighting of the tail light when braking) is NOT supplied with the kit.

    199,00 € In Stock
    Add to cart
    In Stock

  • Quick release (1/4 turn) gas cap in anodised aluminum, specific for the many HONDA models. Sold with a spare seal and the necessary hardware. CAUTION ! Not compatible with Honda's new gas hatches, including CBR 1000 RR SP, CBR 650 2017 (...), A doubt? Your gas cap must be as shown in photo 6.

    44,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below

    9,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock

  • Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous HONDA models. Available in different colors, hardware included. CAUTION : if you plan on mounting it on a 1100XX or 1000RR 2012 + you will need some spacers to rise the hand grip. Without these spacers, your passenger may not have enough space to slip his or her...

    59,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € Out of stock
    Add to cart
    Out of stock

  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock

  • Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following HONDA models : CBR600 F F4 from 1999 to 2000 CBR-600 FS from 2001 to 2002 CBR600-F FI from 2001 to 2006 Sold by pairs, including right and left foot pegs.

    69,00 € Product available with different options
    Product available with different options

  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following HONDA :  CBR600 F4 from 1999 to 2000 CBR-600 FS from 2001 to 2002 CBR 600 Fi from 2001 to 2006 Caution : You will need to drill your fairings to install these protections.

    54,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of Brown rubber grips , Cafe-Racer Design, universal for all motorcycles equipped with a 22mm external diameter handlebar. Sold by pair. Different colors / styles available ( Light Brown , Dark Brown ) 

    12,00 € In Stock
    In Stock

  • Pair of Black rubber grips , Cafe-Racer Design , universal for all motorcycles equipped with a 22mm diameter handlebar. Sold by pair. Different colors / styles available.

    12,00 € In Stock
    In Stock

  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with CBR logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.  

    19,00 € Out of stock
    Out of stock

  • Adhesive tank pad protection, design CBR Different colors available – You choose !

    14,00 € In Stock
    In Stock

  • Decorative sticker with CBR logo.

    4,00 € In Stock
    Add to cart
    In Stock

  • A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.

    4,00 € Product available with different options
    Product available with different options

  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € In Stock
    In Stock

  • Decorative anodised screw with colored offset.

    2,50 € Product available with different options
    Product available with different options

  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock

  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € Product available with different options
    Product available with different options

  • Pair of sliders, Teflon protective pads, specific to :  CBR 600 F4 1999 - 2000 CBR 600 FS 2001 - 2002 CBR 600 FI 2001 - 2006   Sold by pairs.

    25,00 € In Stock
    Add to cart
    In Stock
  • New

    HONDA Keyrings - different models and designs available.

    2,00 € In Stock
    In Stock
  • New

    Complete fairings hardware kit, specific for the following HONDA :   CBR 600-F4 1999 - 2000

    49,00 € In Stock
    Add to cart
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € In Stock
    In Stock

  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock

  • 12V , 35W xenon lighting kit, specific for many HONDA models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual.

    34,00 € In Stock
    In Stock

  • LED Lighting Kit specific for many HONDA. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses.

    44,00 € In Stock
    In Stock
Showing 1 - 148 of 148 items
A problem ? A question ?
We have a dedicated team speaking your language at +33 5 34 43 48 16
Our site uses cookies to improve your navigation. For more information, click here. To accept these conditions and close this message it is by this :
Copyright © AVDB MOTO 2019