The new collection is now available ! Find all the accessories on your motorcycle’s page.
Catalog
Loading...
Steering stem nut for many HONDA models. You will find the motorcycles compatibility list below. Technical informations : Nut : M24x1 Necessary tools for installation : 31 wrench key Depth of the threaded part : 11 mm Maximum depth of the nut : 14 mm Tightening Torque : 300 Nm
M20x2.5 oil filler cap for many HONDA models. You will find the motorcycles compatibility list below.
Front Brake fluid reservoir cap for many HONDA models. You will find the motorcycles compatibility list below.
Rear foot-pegs for many HONDA models. You will find the motorcycles compatibility list below. The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing. Good to know : The hardware (axles, springs, pins...) must be retrieved...
Front foot-pegs for many HONDA models. You will find the motorcycles compatibility list below. The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing. Good to know : The hardware (axles, springs, pins...) must be retrieved...
LED Taillight with integrated turn signals, specific model for Honda Cbr 900 RR from 1998 to 1999.
Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting. All the universal turn signals models we propose are visible on the last photo!
Short brake lever specific to many HONDA , YAMAHA, KAWASAKI, BENELLI, KYMCO and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below If you want a color combination we don’t suggest (between main part of the lever and the 6 positions dial), you can specify you choice within the 8 available colors in the comment...
Long brake lever specific to many HONDA, KAWASAKI, YAMAHA, BENELLI, KYMCO and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comments’...
Adjustable / Foldable (Flip-Up) brake lever specific to many HONDA, KAWASAKI, YAMAHA, BENELLI, KYMCO and KEEWAY models. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...
Short clutch lever specific to many HONDA, BENELLI and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment...
Long clutch lever specific to many HONDA, BENELLI and KEEWAY models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you...
Adjustable / Foldable (Flip-Up) clutch lever specific to many HONDA, BENELLI and KEEWAY models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...
Adjustable and foldable (flip up) lever adjusting part / lever end part.
Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.
Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light. All the universal turn signals models we propose are visible on the last photo!
Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.
Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 45mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod. All the universal turn signals models we propose are visible on the last photo!
Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.
Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm Distance between the two fastening points : 45mm
Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!
Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker). Power : 10W 10 ohm
Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!
Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm
Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !
Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White
Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.
Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description)
3-function universal LED turn signals with stop light, position light and sequential turn signals. Sold by pairs.
Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.
Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 45mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 45mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
2 function universal LED turn signals with position light and sequential turn signals. Sold by pairs.
Windscreen fastening screws in anodised aluminum. Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum. Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm
High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !
Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.
Full pack containing : - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)
Rear solid brake disc, model in 220 mm external diameter, specific and adaptable to many HONDA and TRIUMPH. Measurements and list of compatibilities per motorcycle models are available below for further information.
Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).
Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.
Anodised universal valve caps, different colors available. Sold by pairs.
Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m
Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm
Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm
Pair of front brake discs, 296 mm external diameter, specific and adaptable to many HONDA models. Measurements and list of compatibilities per motorcycle models are available below for further information. Sold by PAIR.
Pair of front brake discs, 310 mm external diameter, specific and adaptable to many HONDA models. CBR 900RR 919 (SC33 / H294) Fireblade W , X 1998-1999 CBR 900 RR Fireblade Japan 1998-1999 Measurements and list of compatibilities per motorcycle models are available below for further information. Sold by PAIR.
Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.
Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm, for screws installed with a 8 Allen Key
Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm
Aftermarket front headlight assembly , brand new product, specific to the following HONDA models : CBR 900 RR 919 1998 and 1999
Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many HONDA models (list of compatibilities below). Sold by pairs, different colors available. Measures : 6,0 x 2,8 cm at the largest point Distance between each fastening point : 4 cm
Front brake fluid reservoir cap in CNC 6061 anodised aluminum, round model with 2 fastening holes, specific for numerous HONDA models, such as 900RR, 929, VTR SP1 SP2 etc... Measures : Outer diameter : 56mm Inner diameter : around 50mm Distance between each fastening hole : 40mm
6 parts universal tank pad protection, adaptable on all gas tanks.
Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.
OEM gas cap adhesive protection, specific for the following HONDA.
Aftermarket starter engine cover (right side when you are on your motorbike), specific to thefollowing HONDA : CBR-600 F F2 F3 1991 - 1998 CB-600 HORNET-600 1998 - 2007 CB600 F 2004 - 2007 CBR 900 RR 1992 - 1998 CB900 HORNET 900 2002 - 2006
Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
Aftermarket stator cover (left side when you are on the bike), specific to the following HONDA : CBR 900-RR 893 1994 - 1997 CBR 900 RR 919 1998 - 1999 This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this crankcase cover.
Rim edge stickers set for motorcycle rims. Kit of 4 stickers.
Rim edge stickers set for motorcycle rims. Kit of 4 stickers.
Aftermarket starter engine cover (right side when you are on your motorbike), specific to thefollowing HONDA : Hornet 900 2002 - 2006 CBR 900 RR Fireblade 1992 - 1993 CBR900RR Fireblade 1994 - 1997 CBR 900RR / 919 Fireblade 1998 - 1999
Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following HONDA : CBR 900 / 919 RR Fireblade 1992 - 1999 Note : pictures accurately display the kit, as you will receive it. Only the shaft rod can, in some case, slightly change depending on the motorcycle model.
Pair of clip on handlebars (right AND left clip ons) designed for 45mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees
Black Polycarbonate Windscreen, double curvature, specific for HONDA CBR 900 RR from 1998 and 1999.
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Universal aluminum exhaust muffler bracket. Caution : this model will not fit on exhaust systems without adjustable muffler clamps
Pair of universal aluminum rearview mirrors block off plates for many HONDA and BMW models : RR and S1000 RR models. Measurements : 6,1 x 2,1 cm
Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm
Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener Available in the following dimensions: 14mm, 17mm Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units
Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm
3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe
Complete fairings fastening hardware set, specific for Honda CBR 900RR from 1993 to 1999
Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.
Universal aluminium license plate holder, adjustable and foldable.
RACING gas cap in aluminum suitable for many HONDA models.
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of swing arm spools with a laser logo, adaptable on all the HONDA CBR RR and BMW S1000RR.
Oil filler cap in aluminium, with laser-engraved logo, adaptable on many HONDA CBR RR.
Pair of front footrests, aftermarket model based on the OEM, specific to many HONDA. Sold by pairs, right foot peg and left foot-peg.
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of flush-mount indicators (left AND right), universal triangle shape model. Measures : 10 cm x 8 cm x 5,5 cm
Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm
Pair of riser adjustments for tapered handlebars with a 22mm external diameter. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mm Mounting bolt diameter : 10 mm
Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...
Pair of aftermarket rearview mirrors, same form and fitment as the OEM one, specific to the following HONDA : VTR SP1 from 1999 and 2000 CBR 600 FS from 2001 and 2002 CBR600 F4 and CBR 600 FI from 1999 to 2006 CBR 900 RR 919 from 1998 and 1999 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.
Multi-position hinged brake fluid reservoir bracket in anodized aluminum.
USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...
Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...
Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.
Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. . Sold by pair only.
Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.
Motorcycle-design key ring, different models available.
Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system. Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...
Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...
Quick release (1/4 turn) gas cap in anodised aluminum, specific for the many HONDA models. Sold with a spare seal and the necessary hardware. CAUTION ! Not compatible with Honda's new gas hatches, including CBR 1000 RR SP, CBR 650 2017 (...), A doubt? Your gas cap must be as shown in photo 6.
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)
Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...
Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous HONDA models. Available in different colors, hardware included. CAUTION : if you plan on mounting it on a 1100XX or 1000RR 2012 + you will need some spacers to rise the hand grip. Without these spacers, your passenger may not have enough space to slip his or her...
Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!
Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following HONDA models : CBR 900 RR from 1992 to 1999 CBR-400 from 1990 to 1997 Sold by pairs, including right and left foot pegs.
Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.
Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars Battery not included.
Aftermarket rear brake pedal, specific for the following HONDA models : CBR-929RR from 2000 to 2001 This pedal can also be adapted on CBR-900RR from 1992 to 1999 with small modifications. Contact us for more information.
Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following HONDA : CBR 900 RR from 1992 to 1993 CBR 900RR 893 from 1994 to 1997 CBR900 RR 919 from 1998 to 1999 Caution : You will need to drill both sides of your fairing to install these protections.
Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Aftermarket high-end rear brake pedal with adjustable tip, same form and fitment as the OEM one, specific to the following HONDA: CBR900RR 893 from 1992 to 1993 CBR 900RR 893 from 1994 to 1997 CBR 900-RR 919 from 1998 to 1999
Pair of Brown rubber grips , Cafe-Racer Design, universal for all motorcycles equipped with a 22mm external diameter handlebar. Sold by pair. Different colors / styles available ( Light Brown , Dark Brown )
Pair of Black rubber grips , Cafe-Racer Design , universal for all motorcycles equipped with a 22mm diameter handlebar. Sold by pair. Different colors / styles available.
Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm
Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.
Kit of adhesive tapes for the inner rim (front and rear). Model with CBR logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.
Adhesive tank pad protection, design CBR Different colors available – You choose !
A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.
Decorative screw with anodised colored washer. M6x16mm
Decorative anodised screw with colored offset.
Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.
Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets. Kit available with or without fairings fastening plastic clips.
HONDA Keyrings - different models and designs available.
Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.
Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).
LED Lighting Kit specific for many HONDA. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit. IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses.