The new collection is now available ! Find all the accessories on your motorcycle’s page.
Catalog
Loading...
M26x3 oil filler cap for many YAMAHA models. You will find the motorcycles compatibility list below.
Steering stem nut for many YAMAHA models. You will find the motorcycles compatibility list below. Technical informations : Nut : M28x1 Necessary tools for installation : 34 wrench key Depth of the threaded part : 13.8 mm Maximum depth of the nut : 17 mm Tightening Torque : 520 Nm
M51x4 Front Brake fluid reservoir cap for many YAMAHA models. You will find the motorcycles compatibility list below.
M37x4 Rear Brake fluid reservoir cap for many YAMAHA models. You will find the motorcycles compatibility list below.
Rear-view mirrors block-off plates for many YAMAHA models. You will find the motorcycles compatibility list below. Distance between the fastening points : 28 mm Sold by pair.
Front foot-pegs for many YAMAHA models. You will find the motorcycles compatibility list below. The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing. Good to know : The hardware (axles, springs, pins...) must be retrieved...
Short brake lever specific to many YAMAHA. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.
Long brake lever specific to many YAMAHA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section before you...
Adjustable / Foldable (also called Flip-Up) brake lever specific to many YAMAHA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...
Short clutch lever specific to many YAMAHA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the...
Long clutch lever specific to many YAMAHA models with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment...
Adjustable / Foldable (also called Flip-Up) clutch lever specific to many YAMAHA models with cable clutches. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...
Adjustable and foldable (flip up) lever adjusting part / lever end part.
Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.
Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in aluminum. E8 E-marked model, with an orange light. All the universal turn signals models we propose are visible on the last photo!
Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.
Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod. All the universal turn signals models we propose are visible on the last photo!
Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.
Turn signals spacers adapters in plastic, specific for many YAMAHA models, produced from 2002 and over. In case of doubt, your OEM turn signals must be similar to those displayed on pictures 4 and 5.
Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm Distance between the two fastening points : 45mm
Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!
Full fairing kit, unused, Injected ABS quality, specific for the following models : YAMAHA YZF R1 CROSSPLANE 2012 / 2014.
Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker). Power : 10W 10 ohm
Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!
Engine cover protection set in hard plastic and nylon fiber, specific to the following YAMAHA models : YZF-R1 Cross-plane from 2009 to 2014 Preferential price for the complete kit, including engine sliders for : Alternator (left side), Clutch (right side) and Starter (right side). Each of these protections is also available per unit.
Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm
Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !
Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White
Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.
Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description)
3-function universal LED turn signals with stop light, position light and sequential turn signals. Sold by pairs.
AVDB by Jealou'S" Water radiator guard, specific for the OEM radiators of the following YAMAHA models : YZF R6 2006 - 2007 YZF-R6 2008 - 2016 YZF-R1 2007 - 2008 YZF R1 Crossplane 2009 - 2014
Pair of AVDB rearsets specific for the following YAMAHA models : YZF R1 Crossplane 2009 - 2011 YZF-R1 Cross plane 2012 - 2014 Sold by pair only (right and left rearset).
Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.
Front wheel rim sold per unit , in 6061 T6 aluminum, specific for the following YAMAHA : YZF R6 2005 YZF-R6 2006 - 2007 YZF R6 2008 - 2016 YZF R1 2007 - 2008 YZF R1 Crossplane 2009 - 2014 Price also includes delivery through registered and delivered upon signature parcel. The text below should answer most of your question, if you still have doubts do...
Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter. Sold by pair (right AND left). List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.
2 function universal LED turn signals with position light and sequential turn signals. Sold by pairs.
TWO BROTHERS, Black Series slip on exhaust in aluminum, specific for YAMAHA : YZF-R1 from 2009 to 2014 Displayed price includes signed for upon receipt delivery (tracked parcel).
Windscreen fastening screws in anodised aluminum. Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum. Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm
High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !
Pair of front brake disc, 310 mm external diameter, specific and adaptable to the following YAMAHA models : YZF R6 2005 - 2019 YZF R1 / R1M 2007 - 2019 Fazer 800 // FZ8 2010 - 2015 XTZ 1200 SUPER TENERE 2010 - 2016 Measurements and list of compatibilities per motorcycle models are available below for further information. Sold by PAIR.
Rear solid brake disc, model in 220 mm external diameter, specific and adaptable to the following YAMAHA models : YZF R1 from 2004 to 2016 YZF R6 from 2003 to 2016 Sold per unit. Measurements and list of compatibilities per motorcycle models are available below for further information.
Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).
Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M6 fastening thread All Yamaha, Aprilia, Triumph models until 2011. If you need a model with an offset for the bobbins' fastening to your swing arm, you will need the reference DIAANO6 model.
Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.
Anodised universal valve caps, different colors available. Sold by pairs.
Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m
Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm
Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm
Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.
Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm, for screws installed with a 8 Allen Key
Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm
Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many YAMAHA models (list of compatibilities below). Will also fit on many SUZUKI produced before 2002, with the same measures as these block off caps, but you will need to retrieve the OEM nuts. Sold by pairs. Measures : 7,6 x 3,5 cm at the largest pointDistance...
Front or rear brake fluid reservoir cap in CNC 6061 anodised aluminum, round model with integrated thread (screw model), specific for numerous HONDA models, such as CBR 600RR 2007 - 2016, 1000RR 2004 - 2018? CB1000R etc... Measures : Outer diameter : 58mm Inner diameter : 50mm
Aftermarket stator cover (left side when you are on the bike), specific to the following YAMAHA: YZF R1 CROSSPLANE 2009 - 2014 This alternator crankcase has the same shape and fastenings as your OEM one, for an easy installation, without modification. The seal is not supplied with this crankcase cover.
6 parts universal tank pad protection, adaptable on all gas tanks.
Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.
OEM gas cap adhesive protection, specific for the following YAMAHA. CAUTION : Model 1 for YAMAHA produced before 1999 Modele 2 for YAMAHA produced after 1999 Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility
Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models : YZF-R1 CROSS PLANE from 2012 to 2014
Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following YAMAHA models : YZF-R1 Crossplane from 2009 to 2014
Aftermarket starter engine cover (right side when you are on your motorbike), specific to thefollowing YAMAHA: YZF-R1 CROSSPLANE 2009 - 2014
Rim edge stickers set for motorcycle rims. Kit of 4 stickers.
Tail fairing, injected ABS quality, specific for the following models : YZF-R1 CROSS PLANE 2009 - 2011YZF R1 CROSSPLANE 2012 - 2014
Pair of clip on handlebars (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees
Black Polycarbonate Windscreen, double curvature, specific for YAMAHA YZF R1 Crossplane from 2009 to 2014.
Pair of flush-mount indicators (left AND right) for YAMAHA R1 2002 - 2014 and R6 2003 - 2016, and many other Yamaha. Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn signals. These turn signals are E-mark.
Pair of flush-mount indicators (left AND right) for YAMAHA R1 from 2002 to 2014 and R6 from 2003 to 2014 Double-sided tape model, for a direct integration in place of your original turn signals.
Aftermarket front fairing bracket, built in aluminum based on the OEM model, specific to the following YAMAHA : YZF-R1 Cross-plane from 2009 to 2014
Short aluminum license plate holder specific to YAMAHA : YZF-R1 from 2004 to 2014
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
LED Taillight with integrated turn signals , specific model for Yamaha R1 Crossplane from 2009 to 2014.
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm
Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener Available in the following dimensions: 14mm, 17mm Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units
Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm
3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe
Complete fairings hardware kit, specific for the following YAMAHA : R1 Crossplane 2009 - 2014
Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of swing arm spools with a laser “R1” logo, adaptable on all the Yamaha R1 from 1998 to 2014.
Complete kit of rear-sets, specific for the following YAMAHA : YZF R1 Crossplane from 2009 to 2014. The rear brake switch (maintaining the lighting of the tail light when braking) is supplied with the kit.
Pair of front footrests, aftermarket model based on the OEM, specific for all YAMAHA YZF R1 and R6 : YZF-R1 from 1998 to 2019 YZF-R6 from 1999 to 2019 Sold by pairs, right foot peg and left foot-peg. Available in Black or Silver color. Two sizes available : 7,5 cm (2,95") or 9 cm (3,4") - (without fastening)
Engine cover protection crash pad specific for the following YAMAHA models : YZF R1 Crossplane from 2009 to 2014
Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version. These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8). Sold by pair (left AND right mirror).
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm
Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!
Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...
Multi-position hinged brake fluid reservoir bracket in anodized aluminum.
Pair of frame sliders (or crash pads) specific to the following YAMAHA : YZF-R1 Crossplane from 2009 to 2014
Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific for the following YAMAHA models : YZF R1 from 2000 to 2019 YZF R6 from 2003 to 2019 V-MAX 1700 from 2008 to 2016 Sold by pairs, right foot peg and left foot-peg.
Pair of bar end plugs in aluminum, with "R1" logo engraved. Sold with their mounting screw.
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...
Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following YAMAHA : YZF-R1 Crossplane from 2009 to 2014
Pair of aftermarket rear view mirrors, built based on the OEM models, specific for the following YAMAHA models : YZF-R1 CROSSPLANE from 2009 to 2014 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.
Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...
Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.
Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.
Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. . Sold by pair only.
Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.
Motorcycle-design key ring, different models available.
Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system. Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm
Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...
Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...
Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M6 fastening thread, for example : All Yamaha, Aprilia, Triumph models until 2011.
Aftermarket front headlight assembly , brand new product, specific to the following YAMAHA models : YZF R1 CROSSPLANE 2012 2013 2014 LED position lights strip integrated in the headlight (as you can see on the pictures)
Seat cowl in Injection ABS, brand new and specific for the following BMW : R1 CROSSPLANE from 2009 to 2014. + 10€ extra for color models (other than black and white). Please check pictures to control the exact color you will receive. We do not guarantee that the color shade will bethe same as OEM.
Rear passenger seat pillion, brand new model, adaptable on the following YAMAHA models : YZF-R1 CROSS-PLANE from 2009 to 2014.
CNC aluminum license plate holder, specific to the following YAMAHA : YZF R1 2004 - 2006 YZF-R1 2007 - 2008 R1 Crossplane 2009 - 2014 R1 / R1M / R1S 2015 - 2019 R6 2016 - 2019 Reflector and turn signals’ brackets included. These parts can easily be removed if you don’t need them.
Quick release (1/4 turn) gas cap in anodised aluminum, specific for tmany YAMAHA models. Sold with a spare seal and the necessary hardware.
Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.
Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.
Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.
Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)
Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...
Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous YAMAHA models. Available in different colors, hardware included. CAUTION : fits on OEM fuel tank caps with 5 or 7 mounting holes. For models with 7 mounting holes, you will need to file down the two small unused fastening offsets on the non-visible part of the...
Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!
Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following YAMAHA models : YZF-R1 CROSSPLANE from 2009 to 2014 Sold by pairs, including right and left foot pegs.
Rear footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following YAMAHA models: YZF-R1 CROSSPLANE from 2009 to 2014 Sold by pairs, including left foot-peg and right foot peg.
Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.
Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars Battery not included.
Pair of adhesive tank traction pads, to be installed on the flanks of the tank. Specific modelfor YAMAHA R1 2009 - 2014. Sold by pair.
Aftermarket gear shift lever or pedal, specific for the following YAMAHA models : YZF R-1 CROSS-PLANE from 2009 to 2011 YZF-R1 CROSS PLANE from 2012 to 2014
Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).
Pair of front footpegs (for the pilot) in CNC 6061 machined and anodised aluminum, available in different colors. Specific model for the following YAMAHA models : YZF-R1 / R1S / R1M from 2000 to 2018 YZF-R6 from 2003 to 2018
Pair of Brown rubber grips , Cafe-Racer Design, universal for all motorcycles equipped with a 22mm external diameter handlebar. Sold by pair. Different colors / styles available ( Light Brown , Dark Brown )
Pair of Black rubber grips , Cafe-Racer Design , universal for all motorcycles equipped with a 22mm diameter handlebar. Sold by pair. Different colors / styles available.
Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm
Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.
Kit of adhesive tapes for the inner rim (front and rear). Model with R1 logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.
Adhesive tank pad protection, design R1 Different colors available – You choose !
Stainless steel radiator guard, specific for the following YAMAHA: YZF-R1 Crossplane 2009 - 2011 YZF R1 Cross-plane 2012 - 2014
A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.
Decorative screw with anodised colored washer. M6x16mm
Decorative anodised screw with colored offset.
Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.
Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets. Kit available with or without fairings fastening plastic clips.
YAMAHA Keyrings - different models and designs available.
Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.
Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).
12V , 35W xenon lighting kit, specific for YAMAHA models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit. IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses and...
LED Lighting Kit specific for many YAMAHA. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit. IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses and will depend on the OPTION...