Full pipe / exhaust system KTM Duke 790 / 890 / R 2018 - 2024

IMPORTANT: IF YOUR EXHAUST IS FIXED WITH A CLAMP SYSTEM AND HAS A DIAMETER EQUIVALENT TO THE ONE SHOWN ON THIS PAGE, THE ADAPTATION WILL BE DONE WITHOUT ANY PROBLEM. IF YOUR EXHAUST IS HELD WITH A FIXED FASTENING BRACKET HOWEVER, MAKE SURE THAT THE DIAMETER OF YOUR MUFFLER'S OUTPUT IS THE SAME AS OUR TUBE'S TO ENSURE THEIR COMPATIBILITY.

Complete / Full exhaust system in stainless steel. Increased durability thanks to the use of "stainless steel 304", and excellent finish thanks to its precision welding (T.I.G.), for an extremely reduced overall weight compared to the original kit.

The exhaust system remains an essential element on our machines, and for many, an accessory that needs to be modified in order to fully enjoy the (authentic) sound of one’s 2-wheelers, but also to improve its look and optimize its performances. There is already a high number of offers on the market, for all tastes and all budgets. Some people do not hesitate to describe exhausts as vulgar tubes which sole purpose is to evacuate gases, so there are very cheap equipment to satisfy them and their vision of what an exhaust is or should be. Others believe that they are goldsmith's pieces, produced with highly complex manufacturing processes and with designs that require both a doctorate in physics and a nuclear power plant for manufacturing. Which is why they swear only by the major brands that give life to this image in their communication.

For our part, let's just say that we position ourselves between this two ideals. The right balance, the good quality / durability / price ratio, this is what AVDB advocates.

For the year 2020, our range, although it will continue to evolve, is already complete since it is composed of several exhausts (slip-on and full exhaust systems), fitting tubes, Y, and decatalysers.

For the most demanding, or for those who only have trust in experience, reputation and brand, AVDB Moto does not forget about you, and the brands HP Corse, Yoshimura USA and Two Brothers will always be distributed by us for a panel of motorcycle models as wide as can be done.

 

AVDB Blog gives the reason why you could chose to change your exhaust

  

EMBELLISHMENT: Since the beginning of the 2000s and the implementation of increasingly strict standards, original exhausts have become more and more complex : they must integrate exhaust valves, a catalyst, a lambda probe (...) to meet these standards. The result is, very often, a rather ugly exhaust line, which breaks and weighs down the lines of your motorcycle.

This is one of the reasons why the terms pipes, extractor etc... are often used to refer to the original exhausts. Racy, aggressive, harmonious, inspired by Moto GP motorcycles, are, for their part, terms reserved to describe the most accomplished exhausts and adaptable lines.

Even only to benefit from a compact and elegant exhaust system, changing the original exhaust is often "a" must, but the benefits are still numerous. 

IMPROVING NOISE (and safety): Listening to a Mozart symphony from an old radio will not have the same cachet and flavour as listening to the same concerto from a high-end hi-fi system. Hearing your engine humming from an original muffler, which must first of all comply with pollution and noise standards and regulations, is therefore not comparable to an engine that purrs through a nice adaptable exhaust system. The noise will be more bewitching, but also more important.

Whether you use your motorcycle on open roads or on tracks, an exhaust that sings will be more melodious for your pleasure, but also better heard by other road users, and this is a significant plus for your daily life and your safety. 

WEIGHT SAVINGS: Original exhaust systems are gas plants, literally and figuratively speaking. All the anti-pollution systems they host have a weight, and make the exhaust line much heavier. Whereas replacing some (or all) of them will obviously make your bike lighter, from a few hundred grams to more than a dozen kilos. It is the cheapest element to replace on a motorcycle to gain in weight/power ratio. 

GAIN IN POWER: Performance for a manufacturer today means first of all respecting pollution standards, while at the same time striving to ensure that this has the least possible impact on the performance of its engine. That's why it's said that the original line is castrating. In the vast majority of cases, by replacing your exhaust system with an adaptable component with different requirement specifications, you will gain in power.

BONUS: 

• Changing the exhaust system also means that the motorcycle will get less heat, since, unlike a catalysed line that retains exhaust gases to make them less polluting, the adaptable exhaust system brings these gases out directly, and more quickly. The result is an overall drop in the temperature of the motorcycle and a significant drop in the exhaust line itself. 
• Agility gain: Let's just take the example of a motorcycle with side exhaust that weighs close to 10 kg, and replace it with a 2 kg element, more compact and lighter. You'll have a more balanced motorcycle, and therefore more agility. QED

NOT TO BE OVERLOOKED:

For injection motorcycles, in order to benefit from optimal performance when changing the exhaust line or when removing the catalytic converter, we strongly recommend reprogramming the CDI box. 

The adaptation of an exhaust system on a motorcycle with "carburetor" may require, in rare cases, an adjustment of the carburetors.

TO REASSURE YOU

1. You have a doubt ? You need more informations about the item ? Do not hesitate to contact us by email, we will answer in English within 24 hours.
2. The item is available in stock. Otherwise you can not buy it. We ship the box from France within 24 hours after we receive your order. No taxes to pay at delivery if you live in E-U.
3. Free shipping for your order if it is more or equal to 100 €.