> >>>YZF R1 2004-2006

Catalog

Availability
YZF R1 2004-2006

YZF R1 2004-2006 

  • M26x3 oil filler cap for many YAMAHA models. You will find the motorcycles compatibility list below.

    15,00 € In Stock
    In Stock

  • Steering stem nut for many YAMAHA models. You will find the motorcycles compatibility list below.    Technical informations : Nut : M28x1 Necessary tools for installation : 34 wrench key Depth of the threaded part : 13.8 mm Maximum depth of the nut : 17 mm Tightening Torque : 90Nm

    19,00 € In Stock
    In Stock

  • M51x4 Front Brake fluid reservoir cap for many YAMAHA models.    You will find the motorcycles compatibility list below.

    15,00 € Product available with different options
    Product available with different options

  • Rear-view mirrors block-off plates for many YAMAHA models. You will find the motorcycles compatibility list below.    Distance between the fastening points : 28 mm     Sold by pair.

    29,00 € In Stock
    In Stock

  • Front foot-pegs for many YAMAHA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock

  • Rear brake fluid reservoir cap for YAMAHA :   YZF R1 2004 - 2006

    15,00 € Product available with different options
    Product available with different options

  • Rear foot-pegs for many YAMAHA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    44,00 € In Stock
    In Stock

  • Front foot-pegs for many YAMAHA models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    44,00 € In Stock
    In Stock

  • LED Taillight with integrated turn signals, specific model for Yamaha R1 from 2004 to 2006.

    39,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Short brake lever specific to many YAMAHA. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.

    27,00 € In Stock
    In Stock

  • Long brake lever specific to many YAMAHA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section before you...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many YAMAHA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...

    37,00 € In Stock
    In Stock

  • Short clutch lever specific to many YAMAHA models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the...

    27,00 € In Stock
    In Stock

  • Long clutch lever specific to many YAMAHA models with cable clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many YAMAHA models with cable clutches. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock

  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock

  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • License plate light (3 LED).

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In Stock
    In Stock

  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € Product available with different options
    Product available with different options

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

    9,00 € Product available with different options
    Product available with different options

  • Turn signals spacers adapters in plastic, specific for many YAMAHA models, produced from 2002 and over.    In case of doubt, your OEM turn signals must be similar to those displayed on pictures 4 and 5.    1 set of 4 spacers adapters is necessary for 1 pair of turn signals (2 adapters per turn indicator)

    2,00 € In Stock
    Add to cart
    In Stock

  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock

  • Full fairing kit, unused, Injected ABS quality, specific for the following YAMAHA models :    YZF R1 2004 / 2006    The first picture shows the color of the fairing kit you will receive (different colors available). Free delivery with this fairing kit, sent with a tracking number, insurance and sign-upon receipt

    610,00 € In Stock
    In Stock

  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. Model to be installed as a bar end caps, fits all handlebars with an 18mm internal diameter or with an 8mm internal thread. All the universal turn signals models we propose are visible on the last photo!

    24,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Quick release (1/4 turn) gas cap in anodised aluminum, specific for tmany YAMAHA models (complete compatibility list available below).   Sold with a spare seal and the necessary hardware.

    44,00 € In Stock
    In Stock

  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock

  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Universal wheel rim tape. AVDB Moto racing model.   MODEL 1 : Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side.    MODEL 2 : Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.

    7,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description) Sold by pairs. Resistors included for free with the...

    29,00 € In Stock
    In Stock

  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Pair of AVDB rearsets specific for the following YAMAHA models :   YZF-R1 2004 - 2006   Sold by pair only (right and left rearset).

    149,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Front wheel rim sold per unit , in 6061 T6 aluminum, specific for the following YAMAHA models :    YZF R1 2004 - 2006 FZ-1 N 2006 - 2015 FAZER-1000 FZ1 S 2006 - 2015    Price also includes delivery through registered and delivered upon signature parcel. The text below should answer most of your question, if you still have doubts do not hesitate to contact...

    329,00 € In Stock
    In Stock

  • Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    79,00 € Product available with different options
    Product available with different options

  • Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 50mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    109,00 € Product available with different options
    Product available with different options

  • 2 function universal LED turn signals with position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • AVDB by Jealou'S" Water radiator guard, specific for the OEM radiators of the following YAMAHA models :    YZF R1 2004 - 2006     

    59,00 € In Stock
    Add to cart
    In Stock

  • TWO BROTHERS slip on exhaust in titanium with magnesium tip, specific for YAMAHA :    YZF R1 2004 - 2006 Displayed price includes signed for upon receipt delivery (tracked parcel).

    840,00 € In Stock
    Add to cart
    In Stock

  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € In Stock
    In Stock

  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock

  • Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.

    4,00 € In Stock
    In Stock

  • Pair of front wave brake discs, model in 320 mm external diameter, specific and adaptable to many YAMAHA. List of compatibilities per motorcycle models are available below.   MEASUREMENTS: External diameter : 320 mm Internal diameter : 132 mm Thickness : 5 mm Mounting holes : 5 Mounting holes' diameter : 8,4 mm Distance between opposite mounting holes :...

    200,00 € In Stock
    Add to cart
    In Stock

  • Rear solid wave shape brake disc, model in 220 mm external diameter, specific and adaptable to many YAMAHA. Wave shape. List of compatibilities per motorcycle models are available below for further information.   MEASUREMENTS: External diameter : 220 mm Internal diameter : 105 mm Thickness : 5 mm Mounting holes : 5 Mounting holes' diameter : 10,4 mm...

    60,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock

  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M6 fastening thread All Yamaha, Aprilia, Triumph models until 2011. If you need a model with an offset for the bobbins' fastening to your swing arm, you will need the reference DIAANO6 model.

    9,00 € In Stock
    In Stock

  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € In Stock
    In Stock

  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In Stock
    In Stock

  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € In Stock
    In Stock

  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € In Stock
    In Stock

  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock

  • M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    5,00 € In Stock
    In Stock

  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock

  • Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many YAMAHA models (list of compatibilities below). Will also fit on many SUZUKI produced before 2002, with the same measures as these block off caps, but you will need to retrieve the OEM nuts. Sold by pairs. Measures : 7,6 x 3,5 cm at the largest pointDistance...

    19,00 € Product available with different options
    Product available with different options

  • Front or rear brake fluid reservoir cap in CNC 6061 anodised aluminum, round model with integrated thread (screw model), specific for numerous HONDA models, such as CBR 600RR 2007 - 2016, 1000RR 2004 - 2018? CB1000R etc...   Measures :  Outer diameter : 58mm Inner diameter : 50mm

    14,00 € Product available with different options
    Product available with different options

  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € In Stock
    In Stock

  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock

  • 9,00 € In Stock
    In Stock

  • Aftermarket starter engine cover (right side when you are on your motorbike), specific to thefollowing HONDA : YZF R1 2004 - 2008 FZ-1 2006 - 2016 FAZER-1000 2006 - 2016 FZ-8 2010 - 2015 FAZER-800 2012 - 2015

    49,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length : 120 mm Depth : Hollow (empty) Diameter: 32 mm   Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock

  • Protection pads set including : one slider for front fork and one slider for swingarm, specific to the following YAMAHA models : YZF-R1 from 2004 to 2006

    49,00 € In Stock
    In Stock

  • Adhesive tank pad protection, design R1 Different colors available – You choose !

    14,00 € Product available with different options
    Product available with different options

  • Rim edge stickers set for motorcycle rims. Kit of 4 stickers.    

    8,00 € In Stock
    Add to cart
    In Stock

  • Front Nose / Upper fairing cowl, unused, Injected ABS quality, specific for the following models : R1 2004 - 2006

    129,00 € Out of stock
    Out of stock

  • Tail fairing, injected ABS quality, specific for the following models :   YZF-R1 2004 - 2006

    99,00 € In Stock
    In Stock

  • 12V , 35W xenon lighting kit, specific for many YAMAHA models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses...

    88,00 € Product available with different options
    Product available with different options

  • LED Lighting Kit specific for many YAMAHA. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses and will depend on the OPTION...

    156,00 € In Stock
    In Stock

  • Aftermarket Clutch (right side when you are on your motorbike), specific to the following YAMAHA :   YZF R1 2006    YZF R1 2004 - 2005 / R1 2007 - 2008 / FZ1 & FAZER 1000 & GT  2006 - 2015 ( Design 2006, but will also fits without modification on these models )  The seal is not supplied with this crankcase cover.    

    99,00 € In Stock
    Add to cart
    In Stock

  • M8 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 6 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock

  • M10 Screw covers in anodized aluminium, available in different colours. For flat screw heads, fastened with an Allen key.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock

  • Clutch cable, specific for YAMAHA :     YZF R1 2004 - 2005 YZF R1 2007 - 2008     Sold per unit.   

    19,00 € In Stock
    In Stock

  • Throttle pull and push cable specific for YAMAHA :   YZF R1 : 2004 - 2006   

    29,00 € In Stock
    Add to cart
    In Stock

  • OEM gas cap adhesive protection, specific for the following YAMAHA.   IMPORTANT : Compare the shape of the models on the pictures with your gas hatch to make sur of a good compatibility. 

    14,00 € In Stock
    In Stock

  • Adhesive tank pad protection, design R1.

    19,00 € In Stock
    In Stock
  • New

    Wheel rim tape with R1 logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.   Width : about 1 cm.

    14,00 € In Stock
    In Stock

  • Pair of clip on handlebars (right AND left clip ons) designed for 50mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees

    49,00 € Out of stock
    Out of stock

  • Polycarbonate Windscreen, double curvature, specific for YAMAHA :   YZF R1 2004 - 2006   Various colours available. The transparent windscreen is sent with a free Covering Vinyl Film (at the colour of your choice) to allow you to "dress up" your windsceen and make the finish you like for your motorcycle.

    39,00 € In Stock
    In Stock

  • Pair of flush-mount indicators (left AND right) for YAMAHA R1 2002 - 2014 and R6 2003 - 2016, and many other Yamaha. Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn signals. These turn signals are E-mark.

    14,00 € In Stock
    In Stock

  • Pair of flush-mount indicators (left AND right) for YAMAHA R1 from 2002 to 2014 and R6 from 2003 to 2014 Double-sided tape model, for a direct integration in place of your original turn signals.

    19,00 € In Stock
    In Stock

  • Aftermarket front headlight assembly , brand new product, specific to the following YAMAHA models : R1 from 2004 to 2006

    149,00 € Product available with different options
    Product available with different options

  • Aftermarket front fairing bracket, built in aluminum based on the OEM model, specific to the following YAMAHA :  YZF-R1 from 2004 to 2006

    79,00 € In Stock
    Add to cart
    In Stock

  • Short aluminum license plate holder specific to YAMAHA :  YZF-R1 from 2004 to 2014

    28,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow (empty) Diameter: 34,5 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock

  • Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm

    9,00 € In Stock
    In Stock

  • Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener   Available in the following dimensions: 14mm, 17mm   Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units

    3,00 € In Stock
    In Stock

  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € Out of stock
    Out of stock

  • Gas cap Racing in anodized Aluminium for many Yamaha: R1, R6, YZF,...

    39,00 € In Stock
    In Stock

  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock

  • Complete fairings hardware kit, specific for the following YAMAHA :   YZF R1 2004 - 2006

    54,00 € In Stock
    Add to cart
    In Stock

  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of swing arm spools with a laser “R1” logo, adaptable on all the Yamaha R1 from 1998 to 2014.

    15,00 € Out of stock
    Add to cart
    Out of stock

  • Complete kit of rear-sets, specific for the following YAMAHA: YZF R1 from 2004 to 2006. The rear brake switch (maintaining the lighting of the tail light when braking) is supplied with the kit.

    199,00 € In Stock
    Add to cart
    In Stock

  • Pair of front footrests, aftermarket model based on the OEM, specific for all YAMAHA YZF R1 and R6 : YZF-R1 from 1998 to 2019 YZF-R6 from 1999 to 2019 Sold by pairs, right foot peg and left foot-peg. Available in Black or Silver color. Two sizes available : 7,5 cm (2,95") or 9 cm (3,4") - (without fastening)

    24,00 € In Stock
    In Stock

  • Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version. These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8). Sold by pair (left AND right mirror).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € Product available with different options
    Product available with different options

  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock

  • USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    14,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket rear brake pedal, specific for the following YAMAHA models : YZF-R1 from 2004 to 2006 Two models available : - Classic model, with fix or solid tip (available in silver or black color) - Foldable tip model (available in silver color only)

    29,00 € In Stock
    In Stock

  • Front footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following YAMAHA models : YZF-R1 2004-2006 Sold by pairs, including right and left foot pegs.

    69,00 € In Stock
    In Stock

  • Rear footrest brackets (right and left bracket), aftermarket model based on the OEM, specific for the following YAMAHA models: YZF-R1 from 2004 to 2008 Sold by pairs, including left foot-peg and right foot peg.

    49,00 € In Stock
    Add to cart
    In Stock

  • Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific many YAMAHA models. You will find the motorcycles compatibility list below.    Caution : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware from your past footpegs on ours, and you'll be good to...

    24,00 € In Stock
    In Stock

  • Pair of bar end plugs in aluminum, with "R1" logo engraved. Sold with their mounting screw.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock

  • Adhesive protection for the upper triple tree clamp, specific model for the following YAMAHA YZF R1 from 2004 to 2006 Color: Carbon   

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of frame sliders or crash pads, in CNC anodized aluminium, specific to the following YAMAHA :  YZF-R1 from 2004 to 2006

    64,00 € In Stock
    In Stock

  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock

  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. Sold by pair only.

    6,00 € Out of stock
    Add to cart
    Out of stock

  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock

  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock

  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock

  • Pair of swing arm spools in anodised aluminum, adaptable on all the swing arms with a M6 fastening thread, for example :  All Yamaha, Aprilia, Triumph models until 2011.

    19,00 € In Stock
    In Stock

  • Seat cowl in Injection ABS, brand new and specific for the following BMW  : R1 from 2004 to 2006. + 10€ extra for color models (other than black and white). Please check pictures to control the exact color you will receive. We do not guarantee that the color shade will bethe same as OEM.

    49,00 € In Stock
    In Stock

  • Rear passenger seat pillion, brand new model, adaptable on the following YAMAHA models : YZF-R1 from 2004 to 2006.

    49,00 € In Stock
    Add to cart
    In Stock

  • Ram air intake in injection ABS, specific to the following YAMAHA models : YZF R1 from 2004 to 2006.

    99,00 € In Stock
    Add to cart
    In Stock

  • CNC aluminum license plate holder, specific to the following YAMAHA : YZF R1 2004 - 2006 YZF-R1 2007 - 2008 R1 Crossplane 2009 - 2014 R1 /  R1M / R1S 2015 - 2020 R6 2016 - 2020 Reflector and turn signals’ brackets included. These parts can easily be removed if you don’t need them.

    54,00 € In Stock
    Add to cart
    In Stock

  • Pair of aftermarket rear view mirrors, built based on the OEM models, specific for the following YAMAHA models : YZF R1 from 2004 to 2006 & from 2007 to 2008 YZF R6 from 2006 to 2007 Sold by pairs, right rear-view mirror and left mirror. Homologated for road use.

    28,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth: 117 mm Diameter: 31 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below

    9,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock

  • Anodized aluminum passenger hand grip, installation on fuel tank’s cap. Specific for numerous YAMAHA models.    CAUTION : fits on OEM fuel tank caps with 5 or 7 mounting holes. For models with 7 mounting holes, you will need to file down the two small unused fastening offsets on the non-visible part of the hand-grip (see last pictures).   Available in...

    59,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock

  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of adhesive lateral grips for the sides of the tank (right pad and left grip). Specific for YAMAHA :    R1 1998 - 2001   YZF-R1 2002 - 2006 R1-SP 2006    These protections are perfect for a discreet look while offering a cool design to your machine.

    24,00 € In Stock
    In Stock

  • Aftermarket gear shift lever or pedal, specific for the following YAMAHA models :  YZF-R1 from 2004 to 2008

    29,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with R1 logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Stainless steel radiator guard, specific for the following YAMAHA: YZF-R1 2004 - 2006 YZF R1 2007 - 2008

    49,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket speedometer cover, with the same size and fastenings as OEM, specific for the following YAMAHA models : YZF-R1 2004 - 2006 YZF-R6 2006 - 2016 Sold as displayed on pictures.

    34,00 € In Stock
    Add to cart
    In Stock

  • Decorative sticker with R1 logo.

    8,00 € In Stock
    Add to cart
    In Stock

  • A M10 decorative screw that will give you energy even on a Monday morning ! Right side thread (standard). Sold by pair.

    4,00 € In Stock
    In Stock

  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € Out of stock
    Out of stock

  • Decorative anodised screw with colored offset.

    2,50 € In Stock
    In Stock

  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock

  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € In Stock
    In Stock

  • Pair of sliders, Teflon protective pads, specific to :  YZF R1 2004 - 2006 Sold by pairs.

    25,00 € In Stock
    Add to cart
    In Stock

  • Front pilot seat, brand new model, adaptable on all the YAMAHA :    YZF R1 2004 - 2006

    69,00 € In Stock
    Add to cart
    In Stock

  • YAMAHA Keyrings - different models and designs available.

    2,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Waste tube, cables or pipes bracket in anodised aluminum, universal model adaptable to many motorcycle and scooter models. Sold per unit, various colours available.

    9,00 € In Stock
    In Stock

  • Radiator, original type model, specific for following YAMAHA :     YZF R1 2004 - 2006      Preferential rate for the option WITH COVER PROTECTION.

    139,00 € In Stock
    In Stock

  • LED auxiliary light, universal modell with fastening for handlebars with a 22 or 28mm external diameter. Excellent lighting quality, white colour.   Sold by pairs, these lighting spots are ultra resistant, almost unbreakable !

    99,00 € In Stock
    Add to cart
    In Stock

  • Easy-pull clutch system in anodised aluminum. To be installed between the clutch lever and cable to reduce the effort to pull your clutch lever in.   Installs on all motorcycles with cable clutch system.

    29,00 € In Stock
    In Stock

  • Decorative sticker with R1 logo.

    4,00 € In Stock
    In Stock

  • Decorative sticker with RACING logo.   Dimension : 9x1.2 cm    Sold by pair. Various colours available.

    4,00 € In Stock
    In Stock
  • New

    Exhaust Connection tube / Mid Pipe link specific for YAMAHA : YZF R1 2004 - 2006   SPECIFICATIONS: Compatibility : OEM exhaust line Weight : 1200 gr Output diameter : 51 mm    HOMOLOGATION : In theory, the homologation will depend mostly on the exhaust you will fit at the end of the tube. As the sleeve is only an intermediate connecting element, if the...

    99,00 € In Stock
    Add to cart
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock
Showing 1 - 177 of 177 items
A problem ? A question ?
We have a dedicated team speaking your language at +33 5 34 43 48 16
Our site uses cookies to improve your navigation. For more information, click here. To accept these conditions and close this message it is by this :
Copyright © AVDB MOTO 2019