Catalog

Availability
HARLEY DAVIDSON

HARLEY DAVIDSON 

  • LED Taillight with integrated turn signals, specific model for  Harley Davidson DEUCE.

    49,00 € In stock
    In stock
  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In stock
    In stock
  • License plate light (3 LED).

    9,00 € In stock
    In stock
  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In stock
    In stock
  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € In stock
    In stock
  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In stock
    In stock
  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In stock
    In stock
  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In stock
    In stock
  • Windscreen fastening screws in anodised aluminum. Sold individually (1 screw + washer + threaded rubber). Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Purchase from 4 units minimum.

    1,25 € In stock
    In stock
  • LED rear Taillight, specific model for Harley-Davidson Gamme Softail and Sportster.

    59,00 € In stock
    In stock
  • LED Taillight with integrated turn signals , specific model for Harley Davidson Gamme Sportster, Softail. Rear tail-light with integrated indicators but without incorporated license plate light.

    59,00 € In stock
    In stock
  • LED Taillight with integrated turn signals , specific model for Harley-Davidson Street Glide Tribar model with the slot on the mudguard. For models after 2009 and +, you will have to create wires extensions to connect it to your original taillight connection.

    59,00 € Product available with different options
    Product available with different options
  • -29% 34,00 €
    -29%

    High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    34,00 € 24,00 € In stock
    In stock
  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € In stock
    In stock
  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In stock
    In stock
  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In stock
    In stock
  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In stock
    In stock
  • Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm,  for screws installed with a 8 Allen Key

    0,55 € In stock
    In stock
  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In stock
    In stock
  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In stock
    In stock
  • LED rear Taillight, specific model for Harley Davidson gamme Softail and Sportster.

    49,00 € Out of stock
    Out of stock
  • LED Taillight with integrated turn signals, specific model for Harley-Davidson V-ROD Night Rod.

    49,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In stock
    In stock
  • -25% 39,00 €
    -25%

    Gear shift rod linkage 29 / 31 cm, tribal design in chrome aluminum, universal for custom and classics.

    39,00 € 29,00 € In stock
    In stock
  • -25% 39,00 €
    -25%

    Gear shift rod linkage 30 / 34 cm, in chrome aluminum, universal for custom and classics. Two models available : Skull or Malta Cross

    39,00 € 29,00 € In stock
    In stock
  • -25% 39,00 €
    -25%

    Gear shift rod linkage 39 / 41 cm, tribal design in chrome aluminum, universal for custom and classics. Skull Design.

    39,00 € 29,00 € In stock
    In stock
  • -28% 35,00 €
    -28%

    Pair of universal handlebar grips in chromed aluminium diameter 25 / 25mm.

    35,00 € 25,00 € In stock
    In stock
  • -28% 35,00 €
    -28%

    Pair of aluminium and leather handlebar grips. Diameter 25 / 29mm.

    35,00 € 25,00 € Out of stock
    Add to cart
    Out of stock
  • -43% 16,00 €
    -43%

    Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    16,00 € 9,00 € Product available with different options
    Product available with different options
  • -48% 17,50 €
    -48%

    3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    17,50 € 9,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € Out of stock
    Add to cart
    Out of stock
  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Out of stock
    Out of stock
  • -20% 24,00 €
    -20%

    Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    24,00 € 19,00 € In stock
    In stock
  • -45% 22,00 €
    -45%

    Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    22,00 € 12,00 € In stock
    In stock
  • -26% 19,00 €
    -26%

    USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    19,00 € 14,00 € In stock
    In stock
  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In stock
    In stock
  • Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...

    9,00 € In stock
    In stock
  • -14% 34,00 €
    -14%

    Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    34,00 € 29,00 € Product available with different options
    Product available with different options
  • -33% 9,00 €
    -33%

    Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. 2 LEDs lights on each piece. Sold by pair only.

    9,00 € 6,00 € Out of stock
    Add to cart
    Out of stock
  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In stock
    In stock
  • Motorcycle-design key ring, different models available.

    2,00 € In stock
    In stock
  • -26% 19,00 €
    -26%

    Universal phone holder with handlebar mounting bracket. Min and max width of the phone holder : Min: 57mm Max: 87mm

    19,00 € 14,00 € In stock
    In stock
  • -20% 24,00 €
    -20%

    Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    24,00 € 19,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In stock
    In stock
  • Front LED headlight. Round adaptable model.Measures : Diameter : 7 inch (17,78 cm) Profondeur : 3,74 inch (9,5 cm) LED bulbs included in the font light, 3 pins connector similar to H4 ones that can be found on nearly all round headlights equipped naked motorbikes.

    89,00 € In stock
    In stock
  • -34% 29,00 €
    -34%

    2 in 1 system : phone holder equipped with an integrated charger and its USB socket. Universal mounting bracket, designed for an installation on handlebars from 22 to 28 mm external diameter. Measures: Holder alone: 12.3 x 6.2 x 1.8 cm MAX possible width for the phone holder: 9.3 cm Offset between handlebars and phone holder: 5.5 cm Length of the...

    29,00 € 19,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options
  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In stock
    In stock
  • -20% 15,00 €
    -20%

    Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    15,00 € 12,00 € In stock
    In stock
  • -52% 19,00 €
    -52%

    Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    19,00 € 9,00 € In stock
    In stock
  • Aluminum license plate holder, Side-Mount model, with LED license plate light.  This model is universal, that's to say it is designed to be adapted on various motorcycle models (NOT specific for some models). You will find all useful info below to check compatibility with your motorcycle

    44,00 € In stock
    In stock
  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € Product available with different options
    Product available with different options
  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In stock
    In stock
  • Pair of rearview mirrors extension offset, universal model for Naked motorbike mirrors (fastening on the handlebars). Suitable for many racing mirrors we propose on our catalogue. In case of doubt, contact us ! Allows to extend the rear-view mirrors by 4,2cm on the sides ! Hardware not included with this mirror extension

    9,00 € In stock
    In stock
  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € Out of stock
    Add to cart
    Out of stock
  • Universal tank side traction pads set. To be installed on a clean tank’s sides.Sold by complete kit (4 parts, as displayed on pictures). Measures: Part 1 (x2 quantities) : 21 x 5,7 x 3 cmPart 2 (x2 quantities) : 18,3 x 5,6 x 4 cmBlack or Transparent color, you choose

    19,00 € Out of stock
    Out of stock
  • Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available (S, M and L) and 2 types of fastenings (handlebar or screw).   Sold in kit: phone cover and fixing system.

    17,00 € In stock
    In stock
  • -33% 6,00 €
    -33%

    A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.

    6,00 € 4,00 € Product available with different options
    Product available with different options
  • Front headlight with bulbs. Universal and adaptable round model. Available with or without front grill cover.

    34,00 € Product available with different options
    Product available with different options
  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € In stock
    In stock
  • Decorative anodised screw with colored offset.

    2,50 € In stock
    In stock
  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In stock
    In stock
  • -44% 9,00 €
    -44%

    Universal grill cover for round headlights. Directly mounts over the headlight, on the side fastenings. Measures : Grill Diameter = 160 mm Length of the fastening pads = 72 mm

    9,00 € 5,00 € In stock
    In stock
  • -25% 12,00 €
    -25%

    Speedometer protection TPU film specific for HARLEY DAVIDSON's speedometers with a 81 mm diameter. Sold by unit.

    12,00 € 9,00 € In Stock
    In Stock
  • Speedometer protection TPU film specific for : HARLEY DAVIDSON Street 500 / 750

    9,00 € In Stock
    In Stock
  • -16% 59,00 €
    -16%

    Front headlight with bulbs. Universal and adaptable round model. Model with integrated front grill cover.

    59,00 € 49,00 € In stock
    In stock
  • -11% 44,00 €
    -11%

    Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    44,00 € 39,00 € Product available with different options
    Product available with different options
  • Complete kit of spoke skin, perfect to completely decorate your 2 wheels, front and rear.   Each kit contains 38 short spoke covers (7.5" long) and 38 long ones (8.5" long)   Available in several colors.

    14,00 € In stock
    In stock
Showing 1 - 72 of 72 items