> >>>NINE T 2015-2016

Catalog

Availability
NINE T 2015-2016

NINE T 2015-2016 

  • Rear brake fluid reservoir cap for many BMW models. Compatibility list available below.

    19,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • License plate light (3 LED).

    9,00 € In Stock
    Add to cart
    In Stock

  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € In Stock
    In Stock

  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 55mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock

  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. Model to be installed as a bar end caps, fits all handlebars with an 18mm internal diameter or with an 8mm internal thread. All the universal turn signals models we propose are visible on the last photo!

    24,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Flat handlebar in anodised machined aluminum. Universal model. Length : 76 cm Outer diameter at the handlebar’s end: 22,2 mm Outer diameter in the center of the handlebar: 28,6mm (often indicated as 28 mm) Inside diameter: 14 mm, not threaded Important: Not suitable for motorcycles having a riser designed to receive a 22mm handlebar.

    44,00 € In Stock
    In Stock

  • Universal anodised aluminum right-angle valve stems. Diameter: 8.3 mm Important : suitable for Italian and English models, however this model is NOT suitable for Japanese brands, which usually need an 11.3 mm diameter. Sold by pair.

    9,00 € In Stock
    In Stock

  • Cable clutch perch, High End model in anodised aluminum. Universal for all the motorcycles equipped with a cable clutch. Will fit on all handlebars with a 22mm outer diameter. Sold with an anodised lever, to be selected among : - A short or long clutch lever (no additive cost) - Adjustable in length and foldable in case of a fall (+10€ additive fee)

    49,00 € In Stock
    In Stock

  • Short Clutch lever specific to many BMW 1200 models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify you choice (within the 8 available colors) in the comment before you finalize the...

    27,00 € In Stock
    In Stock

  • Long clutch lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’...

    37,00 € In Stock
    In Stock

  • Short brake lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comment before you finalize the order.

    27,00 € In Stock
    In Stock

  • Long brake lever specific to many BMW models. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the little 6 positions dial), you can specify your choice (within the 8 available colors) in the comments’ section before you finalize...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many BMW models, built or assembled after 2012. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the...

    37,00 € In Stock
    In Stock

  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock

  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € In Stock
    Add to cart
    In Stock

  • Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White

    7,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description)

    29,00 € In Stock
    In Stock

  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • AVDB by Jealou'S" radiator guard, specific for the OEM radiators of the following BMW models : R nineT 2013 - 2019 R Nine-T Pure / RnineT Racer / R Nine T Scrambler / Urban 2017 - 2019

    49,00 € Out of stock
    Add to cart
    Out of stock
  • New

    Kit of standards clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 55mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    79,00 € In Stock
    In Stock
  • New

    Kit of reclining clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 55mm diameter.   Sold by pair (right AND left).   List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    109,00 € In Stock
    In Stock

  • Windscreen fastening screws in anodised aluminum. Sold individually (1 screw + washer + threaded rubber). Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Purchase from 4 units minimum.

    1,25 € Product available with different options
    Product available with different options

  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock

  • Pair of LED position lights in T10 W5W (5 LEDs per position-light). Sold by pair, available in white or orange light.

    4,00 € In Stock
    In Stock

  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € Product available with different options
    Product available with different options

  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € In Stock
    In Stock

  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € In Stock
    In Stock

  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € Product available with different options
    Product available with different options

  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock

  • Round shape bolt covers in plastic, available in different colours. Specific for round and flat screws, with Allen key fastening. 3 different sizes, not matching the diameter of the screws they will cover : 6mm, for screws installed with a 5 Allen Key 8mm, for screws installed with a 6 Wrench 10mm,  for screws installed with a 8 Allen Key

    0,55 € In Stock
    In Stock

  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock

  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € In Stock
    In Stock

  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock

  • 9,00 € In Stock
    In Stock

  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock

  • Pair of clip on handlebars (right AND left clip ons) designed for 55mm diameter forks, consisting of a pair of clamps and a pair of anodized CNC aluminum tubes. Dimensions: Length of the tubes: 29 cm Outside diameter of the tubes: 22.2 mm Angle of inclination: 9.8 degrees

    49,00 € In Stock
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock

  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € Product available with different options
    Product available with different options

  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock

  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock

  • Universal aluminium license plate holder, adjustable and foldable.

    29,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Black or transparent polycarbonate windscreen, sold with its mounting pads, adaptable to all naked bikes (or roadsters)  2 different designs : Just choose the one you prefer !

    39,00 € In Stock
    In Stock

  • Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version. These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8). Sold by pair (left AND right mirror).

    34,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    Add to cart
    In Stock

  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € In Stock
    In Stock

  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € In Stock
    Add to cart
    In Stock

  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock

  • Universal cable clutch perch, sold with its aftermarket clutch lever. Adaptation guaranteed on all handlebars with an outer diameter of 22mm. 

    14,00 € In Stock
    Add to cart
    In Stock

  • Multi-position hinged fluid reservoir bracket in anodized aluminum. Aluminum body (cylinder: 38 x 12 mm) with 28 mm long fastening pads and 10 mm diameter mounting holes at both ends. This bracket is universal. Compare the measures you need for your brake fluid reservoir fastening with the ones below to make sure it’s a fit. If not we have another model...

    9,00 € In Stock
    In Stock

  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock

  • Mounting bracket and adaptor for rearview mirrors, universal model for all handlebars with a 22mm external diameter. Available with 8 mm or 10 mm screw thread (M8 or M10), in normal / classic thread (not inverted). Sold per unit.

    5,00 € In Stock
    In Stock

  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. 2 LEDs lights on each piece. Sold by pair only.

    6,00 € Out of stock
    Add to cart
    Out of stock

  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock

  • Motorcycle-design key ring, different models available.

    2,00 € Product available with different options
    Product available with different options

  • Universal phone holder with handlebar mounting bracket. Min and max width of the phone holder : Min: 57mm Max: 87mm

    14,00 € Out of stock
    Add to cart
    Out of stock

  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system. Length of the wires for the connection to your motorcycle battery / wire harness : 48 cm

    14,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock

  • Front LED headlight. Round adaptable model.Measures : Diameter : 7 inch (17,78 cm) Profondeur : 3,74 inch (9,5 cm) LED bulbs included in the font light, 3 pins connector similar to H4 ones that can be found on nearly all round headlights equipped naked motorbikes.

    89,00 € Product available with different options
    Product available with different options

  • Pair of riser adjustments for tapered handlebars with a 28mm external diameter at the center. Available in different colours. Anodized machined aluminum risers with a 6-months warranty on anodizing. Total height : 50 mmMounting bolt diameter : 10 mm

    34,00 € Product available with different options
    Product available with different options

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle). Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • 2 in 1 system : phone holder equipped with an integrated charger and its USB socket. Universal mounting bracket, designed for an installation on handlebars from 22 to 28 mm external diameter. Measures: Holder alone: 12.3 x 6.2 x 1.8 cm MAX possible width for the phone holder: 9.3 cm Offset between handlebars and phone holder: 5.5 cm Length of the...

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock

  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific for many BMW models (compatibility list below). Sold by pairs, right foot peg and left foot-peg. Fastenings must be retrieved from your current / old footpegs

    24,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of Brown rubber grips , Cafe-Racer Design, universal for all motorcycles equipped with a 22mm external diameter handlebar. Sold by pair. Different colors / styles available ( Light Brown , Dark Brown ) 

    12,00 € In Stock
    In Stock

  • Pair of Black rubber grips , Cafe-Racer Design , universal for all motorcycles equipped with a 22mm diameter handlebar. Sold by pair. Different colors / styles available.

    12,00 € In Stock
    In Stock

  • Pair of rear footpegs (for the passenger) in CNC 6061 machined and anodised aluminum, available in different colors. Specific model for numerous BMW motorcycles, compatibility list available below.

    32,00 € Product available with different options
    Product available with different options

  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Universal tank side traction pads set. To be installed on a clean tank’s sides.Sold by complete kit (4 parts, as displayed on pictures). Measures: Part 1 (x2 quantities) : 21 x 5,7 x 3 cmPart 2 (x2 quantities) : 18,3 x 5,6 x 4 cmBlack or Transparent color, you choose

    19,00 € Out of stock
    Out of stock

  • Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available (S, M and L) and 2 types of fastenings (handlebar or screw).   Sold in kit: phone cover and fixing system.

    17,00 € In Stock
    In Stock

  • A M10 decorative screw that will give you energy even on a Monday morning ! Sold by pair.

    4,00 € Product available with different options
    Product available with different options

  • Front headlight with bulbs. Universal and adaptable round model. Available with or without front grill cover.

    34,00 € Product available with different options
    Product available with different options

  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € In Stock
    In Stock

  • Decorative anodised screw with colored offset.

    2,50 € In Stock
    In Stock

  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock

  • Universal grill cover for round headlights. Directly mounts over the headlight, on the side fastenings. Measures : Grill Diameter = 160 mm Length of the fastening pads = 72 mm

    5,00 € In Stock
    In Stock

  • Speedometer protection TPU film specific for : Nine T 2014 - 2019

    14,00 € In Stock
    Add to cart
    In Stock

  • Front headlight with bulbs. Universal and adaptable round model. Model with integrated front grill cover.

    49,00 € In Stock
    Add to cart
    In Stock

  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € Product available with different options
    Product available with different options

  • Complete kit of spoke skin, perfect to completely decorate your 2 wheels, front and rear.   Each kit contains 38 short spoke covers (7.5" long) and 38 long ones (8.5" long)   Available in several colors.

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € In Stock
    In Stock

  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock
  • New

    12V , 35W xenon lighting kit, specific for many BMW models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual.

    34,00 € In Stock
    In Stock
  • New

    LED Lighting Kit specific for many BMW. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses.

    44,00 € In Stock
    In Stock
Showing 1 - 115 of 115 items
A problem ? A question ?
We have a dedicated team speaking your language at +33 5 34 43 48 16
Our site uses cookies to improve your navigation. For more information, click here. To accept these conditions and close this message it is by this :
Copyright © AVDB MOTO 2019