> >>>ZXR 750 1989-1995

Catalog

Availability
ZXR 750 1989-1995

STINGER H1 / H2

ZXR 750 1989-1995 

  • Cap for the clutch liquid reservoir, adaptable for many KAWASAKI models.    You will find the motorcycles compatibility list below.

    14,00 € In Stock
    In Stock

  • Rear-view mirrors block-off plates for many KAWASAKI models. You will find the motorcycles compatibility list below.    Distance between the fastening points : 28 mm     Sold by pair.

    29,00 € In Stock
    In Stock

  • Rear foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be retrieved...

    39,00 € In Stock
    In Stock

  • Front foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be...

    39,00 € Product available with different options
    Product available with different options

  • Front foot-pegs for many KAWASAKI models. You will find the motorcycles compatibility list below.    The foot rests are sold by pair (left AND right footrest) with specific fastenings in order to be installed without any modification on the motorcycle models indicated in the listing.   Good to know : The hardware (axles, springs, pins...) must be...

    44,00 € Out of stock
    Out of stock

  • LED Taillight with integrated turn signals, specific model for Kawasaki ZXR 750 from 1992 to 1995 & GPZ 500 (phase 2).

    44,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in aluminum with 17 LEDs and an orange lighting.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Turn signals spacers adapters in plastic, specific for many YAMAHA and KAWASAKI. These adapters can also adapt on other models.   Will fit on all KAWASAKI models produced since 1990. Will also fit for YAMAHA produced before 2002. For example  R1 2000 - 2002 ; Fazer 1000 2001 - 2005 etc   In case of doubt, your OEM turn signals must be similar to those...

    2,00 € In Stock
    Add to cart
    In Stock

  • Short brake lever specific to many models. Detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comment before you finalize the order

    27,00 € In Stock
    In Stock

  • Long brake lever specific to many models. Detailed list of compatibilities per motorcycle and year available below. If you want a color combination we don’t suggest (between main part of the lever and 6 positions dial), you can specify your choice within the 8 available colors in the comments before finalizing the order.

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) brake lever specific to many models. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (between main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in the comments’ section before you...

    37,00 € In Stock
    In Stock

  • Short clutch lever specific to many KAWASAKI and TRIUMPH models, with hydraulic clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice (within the 8 available colors) in the...

    27,00 € In Stock
    In Stock

  • Long clutch lever specific to many KAWASAKI and TRIUMPH models with hydraulic clutch system. The detailed list of compatibilities per motorcycle and year is available below. If you want a color combination that we don’t suggest (between the main part of the lever and the 6 positions dial), you can specify your choice within the 8 available colors in the...

    27,00 € In Stock
    In Stock

  • Adjustable / Foldable (also called Flip-Up) clutch lever specific to many KAWASAKI and TRIUMPH models with hydraulic clutches. Detailed list of compatibilities per motorcycle and year below. If you want a color combination we don’t suggest (main part of the lever, 6 positions dial and adjustable part), specify your choice within the 8 available colors in...

    37,00 € In Stock
    In Stock

  • Adjustable and foldable (flip up) lever adjusting part / lever end part.

    7,00 € In Stock
    In Stock

  • Set of 4 adjusters (2 large, 2 small) in anodized aluminium for short, long and adjustable and foldable levers.

    8,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 8 LEDs and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic with orange lighting and a blinking indicator on the rear of the turn signals, towards the pilot (blinking on both sides). All the universal turn signals models we propose are visible on the last photo!

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with  an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • License plate light (3 LED).

    9,00 € In Stock
    Add to cart
    In Stock

  • Anodized aluminum brake fluid reservoir with adjustable mounting bracket It fits in the place of any reservoir separate from the master cylinder. Depending on the bike, it will be suitable for the front as well as for the rear, and for the clutch when it is a hydraulic system. Caution, this is an universal model, so a minimum of adaptation is required.

    27,00 € Product available with different options
    Product available with different options

  • Kit of reclining and raising clip on bracelets + handlebar tubes, designed to be installed on all motorcycles with front forks having a 43mm diameter.    Sold by pair (right AND left).    List of compatibility per motorcycle models (non exhaustive) available at the bottom of the description.

    139,00 € Product available with different options
    Product available with different options

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 15 LED and an orange light. Design with a center hole. For installation on MT07 / FZ07, you must install and reverse a turn signal shutter so the nut can be screwed on the turn signal's rod.  All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Universal anodised aluminum right-angle valve stems. Diameter: 11.3 mm Important : suitable for Japanese models, however this model is NOT suitable for Italian and English brands, which usually need an 8.3 mm diameter. Sold by pair.

    9,00 € Product available with different options
    Product available with different options

  • Aluminum license plate light with 4 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom). Measures : 56mm x 20 mm  Distance between the two fastening points : 45mm  

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal LED turn signals in aluminum. New model with 1 powerful LED light, orange color. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    In Stock

  • Pair of resistors for LED turn indicators. Sold by pairs. 1 pair of resistors is necessary for 1 pair of LED turn signals (USUALLY enough, although we cannot take responsibility if it is not : on some rare models you may need more than 1 resistor per blinker).  Power : 10W 10 ohm

    3,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. Model to be installed as a bar end caps, fits all handlebars with an 18mm internal diameter or with an 8mm internal thread. All the universal turn signals models we propose are visible on the last photo!

    24,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 9 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    19,00 € In Stock
    Add to cart
    In Stock

  • Motorbike tubular and universal insurance slip or tax disc. Length of the tube : 6 cm Diameter : 2.3 cm Diameter of the mounting hole : 0.8 cm

    12,00 € In Stock
    In Stock

  • Universal adhesive tank pad protection, AVDB Moto model with carbon look. Perfect to prevent your belt from scratching your tank while giving a touch of customization to your motorcycle !

    9,00 € Out of stock
    Add to cart
    Out of stock

  • Universal wheel rim tape. AVDB Moto racing model. Pre-cut in 1/3 for an easier installation. In total 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Available colors : Black / Red or Black / White

    7,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic. E8 E-marked model, with 8 SMD LEDs on the front, and 2 SMD LEDs on the rear side, both in orange.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of 7 LED turn signals, Universal model in plastic, E8 E-marked. Available in two versions: Standard model, i.e with a regular, classic blinking. Sequential model, that is to say that the LEDs light up one after the other, for a better visibility and for more style (video link in the description) Sold by pairs. Resistors included for free with the...

    29,00 € In Stock
    In Stock

  • 3-function universal LED turn signals with stop light, position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in aluminum. E8 E-marked model, with 3 LED and an orange light.

    19,00 € In Stock
    Add to cart
    In Stock

  • 2 function universal LED turn signals with position light and sequential turn signals.  Sold by pairs.

    34,00 € In Stock
    Add to cart
    In Stock

  • Windscreen fastening screws in anodised aluminum.   Sold individually (1 screw + washer + threaded rubber). Purchase from 4 units minimum.   Caution : diameter 5 mm for this windscreen screw, on some Italian motorcycles you will need a diameter 4. Length : 15mm

    1,25 € Product available with different options
    Product available with different options

  • High quality 3D Adhesive covering film, available in different carbon colors, with a honeycomb structure for better sticking capacities. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.52m x 0.5m and 0.21mm thick Decreasing prices for all quantities over 1.52m x 2m contact us !

    29,00 € In Stock
    In Stock

  • Full pack containing : - An universal adjustable and foldable license plate holder - license plate lighting 3 LEDs (REF EDP1)

    35,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of universal heated grips. Suitable for all handlebars with an outer diameter of 22mm (left side) and 24mm (right side).

    29,00 € In Stock
    In Stock

  • Motorbike insurance slip or tax disc Hexagonal shape holder. Available in different colors, measures displayed on the last photos.

    12,00 € In Stock
    In Stock

  • Anodised universal valve caps, different colors available. Sold by pairs.

    4,00 € Out of stock
    Out of stock

  • Universal wheel rim tape, solid color. Model set on roller, for a straight stripe laying. Ready to apply on 17” clean rims. Width : 7 mmLength : 6m

    14,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/3. 12 parts, designed to equip a complete motorcycle. 3 parts per rim side. Ready to apply on 17” clean rims. Width : 6mm

    14,00 € Product available with different options
    Product available with different options

  • Universal fluorescent wheel rim tape. Fluorescent racing wheel rim tape pre-cut in 1/3. 12 parts designed to equip a complete motorcycle. 3 pars per rim side. Ready to apply on 17” clean rims. Width : 6mm

    17,00 € Product available with different options
    Product available with different options

  • Universal valve caps for all motorcycles and scooters. Grenade shape. Sold by pair.

    4,00 € In Stock
    In Stock

  • M6 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 5 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    5,00 € In Stock
    In Stock

  • Hexagonal or six-sided shape bolt covers in plastic, available in different colours. Specific for hexagonal and flat screws and bolts with Allen key fastening. 3 different sizes available (cover diameter) : 10 mm 12 mm 14 mm

    2,50 € In Stock
    In Stock

  • Pair of high-end rearview mirrors block off plates in CNC 6061 anodized aluminum, specific for many YAMAHA models (list of compatibilities below). Will also fit on many SUZUKI produced before 2002, with the same measures as these block off caps, but you will need to retrieve the OEM nuts. Sold by pairs. Measures : 7,6 x 3,5 cm at the largest pointDistance...

    19,00 € Product available with different options
    Product available with different options

  • 6 parts universal tank pad protection, adaptable on all gas tanks.

    14,00 € Product available with different options
    Product available with different options

  • Tire decorative pen / permanent marker. To be used on the sides or flanks of the tires, perfect to renew aging letters or to make a customized decoration.

    9,00 € In Stock
    In Stock

  • 9,00 € In Stock
    In Stock

  • Pair of front wave brake discs, model in 320 mm external diameter, specific and adaptable to many KAWASAKI. List of compatibilities per motorcycle models are available below.   MEASUREMENTS: External diameter : 320 mm Internal diameter : 61 mm Thickness : 5 mm Mounting holes : 5 Mounting holes' diameter : 10,4 mm Distance between opposite mounting holes...

    200,00 € Out of stock
    Add to cart
    Out of stock

  • Rear solid wave shape brake disc, model in 230 mm external diameter, specific and adaptable to many KAWASAKI. List of compatibilities per motorcycle models are available below for further information.    MEASUREMENTS: External diameter : 230 mm Internal diameter : 82 mm Thickness : 5 mm Mounting holes : 5 Mounting holes' diameter : 10,4 mm Distance...

    60,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal rubber and foam handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length : 120 mm Depth : Hollow (empty) Diameter: 32 mm   Sold by pairs, various colors available.

    8,00 € In Stock
    In Stock

  • Adhesive tank pad protection, design ZX6R Different colors available – You choose !

    14,00 € Product available with different options
    Product available with different options

  • Adhesive tank pad protection, design ZX10-R. Different colors available – You choose !

    14,00 € Product available with different options
    Product available with different options

  • Rim edge stickers set for motorcycle rims. Kit of 8 stickers.  

    8,00 € In Stock
    Add to cart
    In Stock

  • LED Lighting Kit specific for many KAWASAKI. Compatibility list per motorcycle models available below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual. GOOD TO KNOW : the number of bulbs you will receive will be indicated in parentheses.

    44,00 € In Stock
    In Stock

  • M8 Screw covers in anodized aluminium, available in different colours. Designed for screws with a 6 mm BTR (or Hex key) head.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock

  • M10 Screw covers in anodized aluminium, available in different colours. For flat screw heads, fastened with an Allen key.    SOLD BY 4, 6, 12 and 20 pieces.

    6,00 € In Stock
    In Stock
  • New

    Adhesive tank pad protection, design NINJA.

    17,00 € In Stock
    In Stock
  • New

    Wheel rim tape with NINJA logo.   Racing model, pre-cut in 1/4, 16 parts designed to make a complete motorcycle. 4 parts per side of the front and rear rims with 4 bonus strips.   Width : about 1 cm.

    14,00 € In Stock
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm Depth: Hollow (empty) Diameter: 34,5 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Different colors available, hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    In Stock

  • Pair of universal aluminum rearview mirrors block off plates for many sportbikes and tourers. Measures : 6,1 x 2,1 cm

    9,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs. Universal, black painted model. Fits on all handlebars with an internal diameter of 18mm (adapters provided), non threaded in order to fit the rubber adapters. WARNING: These bar-end plugs are NOT compatible with KAWASAKI OEM handlebars

    9,00 € In Stock
    Add to cart
    In Stock

  • Turn-to-Close, Turn-to-Open 1/4 Aluminum Fastener   Available in the following dimensions: 14mm, 17mm   Decreasing prices : 3 € each 25 € for 10 units 45 € for 20 units

    3,00 € Product available with different options
    Product available with different options

  • Pair of anodised aluminum fork pre load adjusters. Available diameters : 14 mm , 17 mm , 19 mm , 22 mm

    9,00 € Out of stock
    Out of stock

  • 3D Adhesive covering film, available in different carbon colors. Suitable for various uses, adaptable to all your projects and at the height of your imagination! Dimensions per unit (x1): 1.27m x 0.5m and 0.15mm thick If you order more than 1 covering stripe

    12,00 € In Stock
    In Stock

  • Lever guards made of anodized aluminum. Universal model with fasteners adaptable to all handlebars with an inner diameter of 14 or 18 mm. The length of the protection is adjustable (see photos), and the end tip reclining. Available in different colors. Sold by pairs only.

    39,00 € In Stock
    In Stock

  • Universal aluminium license plate holder, adjustable and foldable.

    29,00 € Out of stock
    Add to cart
    Out of stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Pair of bar end plugs in aluminum, with "ZXR" logo engraved. Sold with their mounting screw. Bar end plug length : 36mm Diameter : 28mm Bar end plug weight (without screw) : 44g

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Front brake fluid reservoir cap with 2 fastening holes and laser engraved logo, adaptable on many KAWASAKI models.

    10,00 € In Stock
    Add to cart
    In Stock

  • Pair of front footrests, aftermarket model based on the OEM, specific for the following for many KAWASAKI (see compatibility list below). Caution : these foot-pegs will perfectly, but in some case the provided hardware may not be a perfect match (depending on the motorcycle model). If so simply re-use the hardware from your past footpegs on ours. Sold by...

    24,00 € In Stock
    In Stock

  • Pair of round, bar end rearview mirrors. Two models/designs available (see pictures), one being proposed in fix or foldable version. These mirrors will adapt on all handlebars with an inner diameter of 14mm or 18mm (fastening adapters included), or threaded with a 8mm diameter (M8). Sold by pair (left AND right mirror).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This round model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of flush-mount indicators (left AND right), universal triangle shape model. Measures : 10 cm x 8 cm x 5,5 cm

    14,00 € In Stock
    In Stock

  • Universal booster net, for your helmet or lugguages. Measures : 40 x 40 cm

    4,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with a 3 LED light on the rear side of the turn signals, towards the pilot (white color). All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of universal LED turn signals in plastic, with 17 LED and an orange light. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal bi-color model, with a 10mm long and 18mm diameter offset at the base. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided) or with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT compatible with...

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with bevel design and hidden fastenings. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These caps can also be installed on handlebars with a 6mm threaded spot (screw provided). For OEM KAWASAKI handlebars, you need to re-use your...

    19,00 € Product available with different options
    Product available with different options

  • Multi-position hinged brake fluid reservoir bracket in anodized aluminum.

    12,00 € In Stock
    In Stock

  • USB plug / charger and universal cigarette lighter socket. Charger with cigarette-lighter socket, output in 12V, and USB plug, output in 5V, sold with its handlebar fastening system. The measurements are displayed in the last picture.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rear (passenger) footrests, aftermarket model based on the OEM, specific for the following KAWASAKI models. Caution : in some case the provided hardware may not be a perfect match depending on the motorcycle model. If so, you can re-use the hardware from your past footpegs on ours, and you'll be good to go ! Sold by pairs, right foot peg and left...

    24,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminumwith integrated LED turn indicators. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    69,00 € Out of stock
    Add to cart
    Out of stock

  • Aftermarket brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap + the anodized aluminum bracket. Fits on almost all motorcycles with a separate brake fluid reservoir from the master cylinder Hose provided, but it is strongly recommended to keep the original one. The supplied one should only be used for troubleshooting and...

    14,00 € In Stock
    In Stock

  • Secondary LED light, universal model with a mounting bracket designed to fit on all handlebars with an external diameter of 22 or 28 mm. Very good lighting quality, white light color. 3200 Lumens Sold per unit.

    19,00 € Out of stock
    Add to cart
    Out of stock

  • Complete hardware kit composed of 173 elements, with 63 anodized aluminum screws, available in different sizes.

    29,00 € Out of stock
    Out of stock

  • Pair of license plate LED lights. Mounted on a M5 integrated threaded screw (diameter 5 mm) for a direct and discreet installation on the license plate holder. Sold by pair only.

    6,00 € Out of stock
    Add to cart
    Out of stock

  • Screw and cage nut in anodised aluminum. Sold per unit. Various colors available.

    2,00 € In Stock
    In Stock

  • Motorcycle-design key ring, different models available.

    2,00 € In Stock
    In Stock

  • Universal USB plug / charger. Model with USB output in 5V, sold with its handlebar fastening system.    Length of the wires for the connection to your motorcycle battery / wire harness : 110 cm

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of flush-mount indicators (left AND right) for KAWASAKI : ZX6R 1994 - 2004, ZX9R 1994 - 2003, ZR7 & ZR7-S, ZXR 750, ZX7R, ZX12R, ZRX 1100 & 1200 YAMAHA : Fazer 1000 2001 - 2005, FAZER 600 1997 - 2003 Screw-in model, mounted on a threaded screw and provided with a retaining nut for a direct integration in place of your original turn signals....

    14,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal model with a covering plastic cap. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). For OEM KAWASAKI handlebars, you need...

    19,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined anodised aluminum and in plastic. Sold per unit or by pair, different colors available, necessary hardware included. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale...

    69,00 € In Stock
    In Stock

  • Pair of universal rubber and anodised aluminum handlebar grips with an internal diameter of 22 mm on the left side (clutch) and 24 mm on the right side (throttle).   Measures : Length: 120 mm (+ 13 mm with end caps) Depth: 117 mm Diameter: 31 mm   Sold by pairs, various colors available.

    19,00 € In Stock
    In Stock

  • Pair of rear-view mirrors adapters to replace the OEM mirrors with adaptable ones, and ensure a nice finish on the front fairing. Sold by pair, hardware not included. Designed for all our universal rear view mirrors. Two models available - See Below

    9,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This triangular model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum. This oval model can install in different manners : bar-end or directly on the handlebar itself. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the description below to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum, with small offset and adjustable arms. CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars. Please read the below description to check installation possibilities and advices.

    59,00 € In Stock
    In Stock

  • Aftermarket rear brake fluid reservoir kit including the plastic reservoir + the anodized aluminum cap. Universal model. To avoid mistakes, we invite you to check the type of fastening of your original reservoir before ordering. Height: About 45mm Width: About 40mm at the widest (without fitment)

    12,00 € In Stock
    In Stock

  • Pair of anodized aluminum bar end plugs, available in several colors. Universal flat model, with a discreet offset. Fits on all handlebars with an internal diameter of 14mm or 18mm (adapters provided). These handlebar caps can also be installed on handlebars with an integrated 6mm threaded spot (6 mm screw provided). WARNING: These bar-end plugs are NOT...

    14,00 € In Stock
    In Stock

  • Pair of universal LED turn signals in plastic with 5 SMD LEDs on the front, and 3 SMD LEDs on the rear side, both in orange. All the universal turn signals models we propose are visible on the last photo!

    14,00 € In Stock
    Add to cart
    In Stock

  • Relax cruise control throttle grip for right side handlebar grip. Made in plastic, it will easily install directly on your throttle grip and will allow you to relax your wrist during long journeys. Universal model, will fit on nearly all accelerator grips.

    1,00 € In Stock
    In Stock

  • Universal mechanical watch, to be installed on all handlebars with an outer diameter of 22 or 25 mm. Check the available space on your handlebars to make sure you can install it. Measures : Outer diameter : 45mmHeight (above handle-bars) : 12mm, the rest will be integrated into the handle bars  Battery not included.

    14,00 € In Stock
    Add to cart
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum and plastic. Black color, with a colored ring on the mirror’s arm (different colors available). Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    34,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirrors) in machined and anodised aluminum. Triangular shape. Hardware kit provided. Will fit on naked and faired motorcycles. Caution : if the installation is done on the front fairing, you will need adapters to mount these mirrors (adapters proposed for sale on our store).

    59,00 € In Stock
    Add to cart
    In Stock

  • Aluminum license plate light with 6 LED lights. Flat model, without threaded screws. Sold with 2 screws to install it (mounting at the bottom).Measures : 5,15 x 2,6 x 1,2 cm Distance between the two fastening points : 3,75 cm

    9,00 € In Stock
    Add to cart
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with RACING logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with NINJA logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € Out of stock
    Out of stock

  • Kit of adhesive tapes for the inner rim (front and rear). Model with ZXR logo, designed for 17” rims. Note : Depending on models, you may need to recut some of the tape, moreinformation available below.

    19,00 € In Stock
    In Stock

  • Decorative sticker with NINJA logo.

    5,00 € In Stock
    Add to cart
    In Stock

  • Protective case for phone, navigation system or radar detector. Double waterproof zippers and touch screen.   3 sizes available (S, M and L) and 2 types of fastenings (handlebar or screw).   Sold in kit: phone cover and fixing system.

    17,00 € In Stock
    In Stock

  • A M10 decorative screw that will give you energy even on a Monday morning ! Right side thread (standard). Sold by pair.

    4,00 € In Stock
    In Stock

  • Decorative screw with anodised colored washer. M6x16mm

    1,50 € Out of stock
    Out of stock

  • Decorative anodised screw with colored offset.

    2,50 € In Stock
    In Stock

  • Folding funnel, made of rubber. Measurements available below. Sold per unit, different colors available.

    4,00 € In Stock
    In Stock

  • Box composed of 173 elements, including 63 screws in anodized aluminum, of different sizes. Torx screws, also called star-shaped or star screws, more resilient than conventional hex or Allen screws sockets.   Kit available with or without fairings fastening plastic clips.

    39,00 € In Stock
    In Stock

  • 12V , 35W xenon lighting kit, specific for many KAWASAKI models. You will find the list of all the compatible motorbike models below. LED day position light offered with this xenon kit.   IMPORTANT : the pictures on this page are for guidance only. They are not contractual.

    34,00 € In Stock
    In Stock

  • KAWASAKI Keyrings - different models and designs available.

    2,00 € In Stock
    In Stock

  • Pair of rearview mirrors (left AND right mirror) in anodised aluminum.    This oval model can install in different manners : bar-end or directly on the handlebar itself.   CAUTION: These bar end mirrors are not compatible with a majority of KAWASAKI OEM handlebars.   Please read the description below to check installation possibilities and advices.

    59,00 € Product available with different options
    Product available with different options

  • Waste tube, cables or pipes bracket in anodised aluminum, universal model adaptable to many motorcycle and scooter models. Sold per unit, various colours available.

    9,00 € In Stock
    In Stock
  • New

    Decorative sticker with NINJA logo.

    4,00 € In Stock
    In Stock
  • New

    Decorative sticker with RACING logo.   Dimension : 9x1.2 cm    Sold by pair. Various colours available.

    4,00 € In Stock
    In Stock

  • Universal wheel rim tape. Racing model, pre-cut in 1/4. 16 parts, designed to equip a complete motorcycle. 4 parts per rim side. Ready to apply on 17” clean rims. Width : 10mm Note : the RANDOM color will be sent, as its name states, with a random design.

    5,00 € Product available with different options
    Product available with different options

  • Pair of rearview mirrors, with CNC anodised aluminum arm and plastic mirror shell, with LED integrated turn signals. Universal model for Naked, Sportbikes and Sport GT motorcycles (with adapters for the latter).

    24,00 € In Stock
    In Stock
Showing 1 - 131 of 131 items
A problem ? A question ?
We have a dedicated team speaking your language at +33 5 34 43 48 16
Our site uses cookies to improve your navigation. For more information, click here. To accept these conditions and close this message it is by this :
Copyright © AVDB MOTO 2019